Scion iQ Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(26)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(26)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Scion iQ Power Steering Pressure Hose Replacement is $356 with $174 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Scion iQL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$550.24Shop/Dealer Price$642.11 - $907.17
2013 Scion iQElectricService typePower Steering Pressure Hose ReplacementEstimate$538.53Shop/Dealer Price$628.10 - $891.44
2012 Scion iQL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$538.53Shop/Dealer Price$628.13 - $891.50
2015 Scion iQL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$538.53Shop/Dealer Price$628.13 - $891.49
2014 Scion iQL4-1.3LService typePower Steering Pressure Hose ReplacementEstimate$538.53Shop/Dealer Price$630.04 - $894.85
Show example Scion iQ Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Scion mechanics

Real customer reviews from Scion owners like you.

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0

Ruben

15 years of experience
86 reviews
Ruben
15 years of experience
Scion iQ L4-1.3L - Brake System Flush - Los Angeles, California
great mechanic quick and honest. recommending him to anyone that needs work

Andrew

12 years of experience
962 reviews
Andrew
12 years of experience
Scion iQ L4-1.3L - Oil Change - Kansas City, Missouri
Very good mechanic answered all my questions.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Scion iQ L4-1.3L - Oil Change - Redmond, Washington
He was super friendly. Always on time. And he knows what he's doing

Jimmi

28 years of experience
343 reviews
Jimmi
28 years of experience
Scion iQ L4-1.3L - Serpentine/Drive Belt Replacement - Orlando, Florida
excellent customer service, clean job, highly recommend

Excellent Rating

(26)

Rating Summary
25
1
0
0
0
25
1
0
0
0
Number of Scion iQ services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Scion MECHANICS
500+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mazda 3
The The compact car class is definitely a competitive one, with established models like the Toyota Corolla and Honda Civic taking up a lot of the market every year. However, if you’re looking for a really attractive compact sedan or...
How to Get a Minnesota Driver's Permit
Minnesota Minnesota uses a graduated driver’s license program, like many other states. This program requires all new drivers under 18 years old to begin driving under supervision, in order to practice safe driving before getting their full driver’s license. In...
A 12 Point Guide to Electric Vehicle Tax Credits
Fully electric and plug-in hybrid cars bought after 2010 may be eligible for an up to $7,500 tax credit.

Windshield wipers not working

Hello. The first thing to check with any electrical device is to check the fuse. If the fuse is blown, replace it and try the wipers again. If the wipers work, then you are set to go. If it blows...

The handle on the exterior of my car has snapped off. If I replace to handle will I need to swap over the lock barrel?

Hello, thank you for writing in. Without knowing the model and year of the vehicle, it is difficult to tell what kind of replacement parts you have as true options. With that said, you are likely going to be able...

Car jerks makes noise and runs at a slow speed while driving

Check to see if the air filter and housing tubes are all hooked up and not cracked going to throttle body. Have the computer system codes checked to see what codes are stored and then have the codes pinpoint tested...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com