Saturn SW2 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Saturn SW2 Front Crankshaft Seal Replacement is $180 with $26 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$221.84Shop/Dealer Price$238.64 - $280.11
2000 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$222.61Shop/Dealer Price$240.13 - $288.16
1995 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$226.81 - $266.85
1996 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$226.81 - $266.84
1993 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$228.43 - $269.68
1994 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$226.96 - $267.12
1997 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$226.82 - $266.88
1999 Saturn SW2L4-1.9LService typeFront Crankshaft Seal ReplacementEstimate$211.93Shop/Dealer Price$226.81 - $266.84
Show example Saturn SW2 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0

Ralph

39 years of experience
207 reviews
Ralph
39 years of experience
Saturn SW2 L4-1.9L - Alternator - Seattle, Washington
Ralph was very quick and friendly. He did a wonderful job getting my car running again.

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Saturn SW2 L4-1.9L - Water Pump - Monrovia, California
Timely, professional, kind and thorough.

Robert

18 years of experience
28 reviews
Robert
18 years of experience
Saturn SW2 L4-1.9L - Car is not starting - Media, Pennsylvania
Very helpful and pleasant to work with. Thanks again!

Nelson

27 years of experience
163 reviews
Nelson
27 years of experience
Saturn SW2 L4-1.9L - Valve Cover Gasket - Sacramento, California
Very thorough and meticulous in his work. Explained what he was doing clearly and simply.

Excellent Rating

(18)

Rating Summary
18
0
0
0
0
18
0
0
0
0
Number of Saturn SW2 services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

How to Lube Your Car's Steering and Suspension Parts
Your steering and suspension components are important for a stable car. By lubricating your tire rod ends and ball joints you will have a smooth ride.
Disabled Driver Laws and Permits in Utah
In In the State of Utah, the DMV (Division of Motor Vehicles) provides disabled parking plates and placards to people who have disabilities. If you live in Utah, and you are disabled, you may qualify for a special plate or...
P0539 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Intermittent
P0539 means the A/C evaporator temperature sensor has a too high/low voltage signal, usually caused by a faulty evaporator temperature sensor.

Vauxhall insignia se nav 2.0 cdti - interference or non interference engine

Hi there. Yes the engine is an interference design. This means that if the timing belt breaks the pistons will contact the valve train when not in time. If the belt has broken, I recommend testing the cylinder head and...

My forester recently threw a p0028 code. Replaced the intake solenoid and oil pressure switch but the idle is still rough.

If you used thicker oil than vehicle specified then this can cause problems with the intake variable valve lift system. If you used the wrong oi then change oil and filter again with the proper viscosity oil. If the correct...

I have 2009 Ford police inceptor... My check [engine](/topics-engine-ford/) light came on.... I got a scanner the code read purge valve was bad.... I changed the purge valve an evr Valve..... I unplugged both cables on the battery post... Drove it for 2 days the check engine light came back on... Check the code purge valve.... Do I need to re set it a different way??

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com