Saturn LW1 Loud noises when car is put in gear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(1,654)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(1,654)

Loud noises when car is put in gear Inspection Service

How much does a Loud noises when car is put in gear Inspection cost?

On average, the cost for a Saturn LW1 Loud noises when car is put in gear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LW1L4-2.2LService typeLoud noises when car is put in gear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LW1 Loud noises when car is put in gear Inspection prices

When you put your car in gear, there should be minimal noise. The transmission should engage easily, and you should be able to drive without any effort. If you’re hearing loud noises when the car is put in gear, it could be one of several different problems depending on the type of noise in question and when exactly you’re hearing it. It may not even be related to the transmission.

How this system works:

When you put your car in gear, it puts a load on both the engine and the transmission. When you press the gas, that load changes. For this reason, engines and transmissions have mounts. These mounts cushion, support and secure both the engine and transmission, ensuring that the loading doesn’t translate into loud clunks, thunks, bangs and other abnormal sounds.

In addition, a number of things must happen when you put your car in gear (these will vary drastically depending on whether you’re driving a car with a manual or an automatic transmission). For instance, with a manual transmission, you must press in the clutch pedal, which engages the clutch and allows you to shift gears. If the clutch is worn, you may hear a grinding or screeching sound here.

In an automatic transmission, things work a little differently. There are clutch plates throughout, as well as bands that connect each gear. If either the clutch plates or the bands have suffered wear, it’s possible you’ll hear noises when the transmission changes gears.

Common reasons for this to happen:

  • Low Transmission Fluid: The most common reason for any transmission-related problem is low fluid. Your transmission requires the right amount of fluid to operate, and to protect internal components from wear and tear, heat and friction.

  • Failed Motor Mount: Another common cause of hearing a noise when putting your car into gear is a failed motor mount. Different makes and models use different types of mounts. Some are little more than rubber blocks, while others are hydraulic units. In either instance, a failed mount (or a missing motor mount bolt) will create a very loud noise when you put your car in gear.

  • Failing U-Joint: If you have a rear-wheel drive vehicle, the problem might not be with the engine or transmission, but with the drive shaft. A bad U-joint can cause a very loud sound when putting the car into gear. Play in the joint allows the shaft to flex incorrectly, causing noises and vibrations.

  • Worn Clutch: If you have a manual transmission, it’s possible that the clutch is worn out. This would make a screeching/grinding noise when attempting to put the car in gear.

  • Failing Pilot Bearing: This problem is only pertinent to manual transmissions, and only when engaging the clutch (pressing the clutch pedal in).

  • Failing Throw Out Bearing: If you hear a noise from your manual transmission when releasing the clutch, it could be a failed throw out bearing.

What to expect:

A professional mobile mechanic will visit your home or office to inspect the noise your car is making when putting it into gear. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to crank the car, and then put it in gear to verify and duplicate the noise. Based on this test, the mechanic will either have a diagnosis, or will need to inspect other components of the vehicle to verify their condition and operation. The actual steps taken will depend on the type of noise you’re hearing.

How important is this service?

Unusual noises when putting your car in gear should always be cause for alarm. It might be something relatively simple like a failed U-joint, but it might be a sign of transmission damage, or a failed motor mount, both of which are serious problems. One of our professional mechanics can diagnose and repair the problem for you.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(1,654)

Rating Summary
1,537
69
14
7
27
1,537
69
14
7
27

Jay

37 years of experience
948 reviews
Jay
37 years of experience
Saturn LW1 L4-2.2L - Serpentine/Drive Belt Replacement - Upland, California
Jay is very good and sufficient. Job well done.

Omar

21 years of experience
67 reviews
Omar
21 years of experience
Saturn SC2 L4-1.9L - Serpentine/Drive Belt - Tempe, Arizona

Pete

16 years of experience
192 reviews
Pete
16 years of experience
Saturn L300 V6-3.0L - Timing Belt - Chula Vista, California
Very good!

Chris

18 years of experience
492 reviews
Chris
18 years of experience
Saturn Vue L4-2.4L - Check Engine Light is on - Houston, Texas
He’s very thorough and careful! Excellent technician!

Excellent Rating

(1,654)

Rating Summary
1,537
69
14
7
27
1,537
69
14
7
27
Number of Saturn services completed
18194+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

2011 Dodge Ram vs. 2011 Ford F-150: Which One Should I Buy?
Large trucks can be fun to drive, and even more fun to get dirty. Unfortunately, they may also cause you to get phone calls from friends who need to move into a new apartment. Fortunately, just having a truck may...
How to Avoid Getting Into a Car Crash
Accidents, Accidents, are, unfortunately, a part of driving. From small fender-benders to serious, high-speed collisions, accidents happen all over the world on a daily basis. Since they can cause serious damage to not only your vehicle but also you, it’s...
P0479 OBD-II Trouble Code: Exhaust Pressure Control Valve Intermittent
P0479 code means there is an out-of-the-ordinary voltage reading from the exhaust pressure control valve circuit often due to damaged wiring.

My car starts and shifts but doesn't move in any gear and there is no check engine light, what would be the problem?

You need to check the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) level to see if it is low. This would cause the no transmission engagement. If fluid is full then you have a transmission shift control valve issue which will need to be...

What does 'auxiliary battery malfunction' mean? Also, I hit a trailer and broke a taillight yesterday, should I go to repair shop or dealer?

Your car has two batteries. One conventional sized battery manages the heavy loads like the starter and one smaller battery manages the body loads. The smaller battery is the auxiliary battery and it must be failing. Part of the point...

What would cause the vibration i feel in my gas pedal and floor board?

Vibration felt through the floorboard can be due to tire imbalance, tire defects, or excessive radial force variation, on rear axle mounted tires. Contributing factors in the circumstance you are describing could be worn struts in the suspension. If there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com