Saab 9-7x Reduced Power light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(26)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(26)

Reduced Power light is on Inspection Service

How much does a Reduced Power light is on Inspection cost?

On average, the cost for a Saab 9-7x Reduced Power light is on Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Saab 9-7xL6-4.2LService typeReduced Power light is on InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
2007 Saab 9-7xL6-4.2LService typeReduced Power light is on InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2008 Saab 9-7xV8-6.0LService typeReduced Power light is on InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2009 Saab 9-7xV8-6.0LService typeReduced Power light is on InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
2006 Saab 9-7xL6-4.2LService typeReduced Power light is on InspectionEstimate$104.99Shop/Dealer Price$113.42 - $119.75
2007 Saab 9-7xV8-5.3LService typeReduced Power light is on InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2005 Saab 9-7xV8-5.3LService typeReduced Power light is on InspectionEstimate$124.99Shop/Dealer Price$130.87 - $135.28
2008 Saab 9-7xV8-5.3LService typeReduced Power light is on InspectionEstimate$124.99Shop/Dealer Price$131.24 - $135.94
Show example Saab 9-7x Reduced Power light is on Inspection prices

A Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases will render the vehicle un-drivable.

Since the Reduced Power light can trigger for a number of different reasons, tracking down the exact cause is extremely important, if the vehicle is not properly diagnosed and repaired, the Reduced Power light will trigger again, putting the vehicle in safe mode.

How this system works:

When the vehicle’s computer detects a fault in the engine that affects its drivability, performance, transmission or emission system it will trigger the reduced power light. It will also trigger if there is an issue with the electronic throttle, the accelerator pedal or the throttle module.

When a vehicle goes into reduced power mode it will seriously impact its performance. Some vehicle will be restricted to idle speed while others restrict speed to 20-30 miles per hour. The Reduced Power trigger will save Diagnostic Trouble Codes (DTCs), which will indicate where the fault occurred. In most cases, a Restricted Power light is related to a throttle body or the connector.

Common reasons for this to happen:

  • Faulty Throttle Body: A throttle body is part of the of the air intake system which helps control the amount of air going into the engine. If a throttle body is failing the engine will not get the correct mixture of air and fuel. This can trigger the Reduced Power light as well as lead to a poor running engine. It can also trigger the Check Engine light.

  • Failing Throttle Position Sensor: The throttle position sensor tells the vehicle computer the position of the gas pedal. The computer uses this information to calculate the proper amount of air and fuel to send to the engine. The throttle position sensor also controls shifting the gears of a vehicle, which means that a faulty throttle position sensor will prevent a car from changing gears. If this part is failing, the Reduced Power light will trigger.

  • Faulty Engine Control Unit: The engine control unit is an essential component of a vehicles computer. It regulates and controls many systems, including the drive train and parts of the engine. If a fault is detected in this crucial part, it can trigger the Reduced Power light as well as the Check Engine light. This is a major issue that should be investigated as soon as possible.

  • Faulty Wiring: Exposed or damaged wires can cause issues with the any of these components and will possibly trigger the Reduced Power light. A loose wiring crimp can also be the culprit. Wiring issues can be tricky to track down so using a professional mechanic is a necessity.

  • Malfunctioning Oxygen Sensors: Oxygen sensors are responsible for measuring how rich or lean exhaust gases are leaving a vehicles combustion chamber. The vehicle’s computer uses this information to constantly adjust the amount of fuel going into the engine. A failing or dirty sensor can put too much or too little fuel into the engine. While a failing oxygen sensor will usually trigger a Check Engine light it is possible that the Reduced Power light could also trigger.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Reduced Power light issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your vehicle's air intake system, electrical wiring and sensors, including the throttle body and oxygen sensors, along with other important components. It may be necessary for the mechanic to test drive the car to verify the complaint and provide an accurate diagnosis.

How important is this service?

The Reduced Power light only illuminates if there is a serious issue with the vehicle that must be addressed immediately. In almost all cases, the throttle or the vehicles computer will be malfunctioning which can make driving the vehicle dangerous. While it varies by manufacturer, most vehicles that go into “safe mode” will stay there until the error codes are read by a code scanner.

If the vehicle Reduced Power light illuminates the vehicle should immediately be inspected, diagnosed and repaired.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(26)

Rating Summary
24
2
0
0
0
24
2
0
0
0

PETE

22 years of experience
96 reviews
PETE
22 years of experience
Saab 9-7x L6-4.2L - Serpentine/Drive Belt - Wallingford, Pennsylvania
Pete does excellent work. Went way above and beyond my expectations. Highly recommend this knowledgeable and very personable young man. THANKS again Pete!!

Attila

19 years of experience
963 reviews
Attila
19 years of experience
Saab 9-7x L6-4.2L - Ball Joint Front Replacement (Upper Left, Upper Right) - Paterson, New Jersey
Attila was very knowledgeable about the car parts and was able to explain all the work that had to be done. He was very polite and friendly. He put in 100% effort in his work. I will definitely be using him again and will recommend him to my colleagues and family.

AUDIE

33 years of experience
191 reviews
AUDIE
33 years of experience
Saab 9-7x L6-4.2L - Control Arm Assembly Replacement (Front Upper Left, Front Upper Right) - Henderson, Nevada
Was nice and got the job done fast.

Alex

16 years of experience
435 reviews
Alex
16 years of experience
Saab 9-7x L6-4.2L - Windshield Wiper Motor Replacement (Front) - Mesquite, Texas
For the record, I would like to say that this is the first time I've used a mobile mechanic. Awesome!!!! Alex is very professional and I felt very comfortable dealing with him. He was honest during the whole process and even gave me a quote for an issue I may fix in the near future. I was very satisfied and happy with the whole experience. Great service. Thank you again Alex!

Excellent Rating

(26)

Rating Summary
24
2
0
0
0
24
2
0
0
0
Number of Saab 9-7x services completed
286+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How to Clean the Inside of Your Car
Cleaning Cleaning the interior of your car serves several purposes. It can: Increase your car’s value if you are selling it Extend the life of your vinyl or leather components such as the dashboard and seats Improve your satisfaction with...
How to Replace a Side Window
Our Our cars are our second homes most of the time, and as a result we tend to leave some pretty important things in there. Unfortunately, this means that people could try to break in and steal these items. Coming...
P0332 OBD-II Trouble Code: Knock Sensor 2 Circuit Low Input (Bank 2)
Trouble code P0332 means the PCM is receiving a reading that the knock sensor is too low, which can result in higher emissions and engine problems.

The engine cranks and sputters out, the car has to be jump-started

Hello. Most of the time this is caused by a battery. The battery may be shorting internally and intermittently. It needs to be load tested to know for sure. If it is definitely fine, then the issue may be in...

When I start the car up it still doesn't move when in drive or reverse

A few things can cause the vehicle to not move in any gear. Most vehicles today are drive-by-wire. There is no mechanical connection between the gas pedal and the engine. Electronic sensors at the gas pedal signal electronic sensors at...

Why does my oil light comes on when i break. My oil level is full.

Claimed by Kevin Gainer

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com