Ram 1500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(407)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(407)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Ram 1500 Fuel Injector Replacement is $593 with $453 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Ram 1500V6-3.0L Turbo DieselService typeFuel Injector ReplacementEstimate$4402.42Shop/Dealer Price$5467.88 - $8656.14
2014 Ram 1500V6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.36 - $3506.12
2015 Ram 1500V6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.38 - $3506.17
2016 Ram 1500V6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.38 - $3506.16
2015 Ram 1500V8-5.7LService typeFuel Injector ReplacementEstimate$2052.43Shop/Dealer Price$2532.37 - $3964.70
2013 Ram 1500V8-5.7LService typeFuel Injector ReplacementEstimate$2052.43Shop/Dealer Price$2531.04 - $3962.37
2017 Ram 1500V8-5.7LService typeFuel Injector ReplacementEstimate$1881.25Shop/Dealer Price$2316.94 - $3619.79
2013 Ram 1500V6-3.6LService typeFuel Injector ReplacementEstimate$1831.59Shop/Dealer Price$2251.38 - $3506.16
Show example Ram 1500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(407)

Rating Summary
387
14
1
0
5
387
14
1
0
5

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Ram 1500 V8-5.7L - Fuel Injector - Mesa, Arizona
Very honest and dependable will use again for any minor issues

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Ram 1500 V8-5.7L - Car is not starting - Portland, Oregon
Not as professional as anticipated.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Ram 1500 V8-5.7L - Oil Change - Kirkland, Washington
Great as always. Thanks

Yoel

10 years of experience
212 reviews
Yoel
10 years of experience
Ram 1500 V8-5.7L - Brake Pads Replacement (Front) - Pennsauken, New Jersey
Very knowledgeable, and very good work

Excellent Rating

(407)

Rating Summary
387
14
1
0
5
387
14
1
0
5
Number of Ram 1500 services completed
4477+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Top Up the Oil in Your Car
Regular car maintenance can make a huge difference with keeping your vehicle in good condition. For major repairs and special jobs,...
B1970 OBD-II Trouble Code: Passenger Seatback Forward Switch Circuit Short to Ground
B1970 means there is an issue with the passenger seatback forward switch, likely due to a faulty switch or damaged electrical components.
3 Reasons Your Car Smells like Rotten Eggs
A sulfuric or rotten eggs smell indicates an excess of byproducts left over from failed combustion. Removing the smell requires part replacement.

cranks but wont start. 1986 Toyota Pickup

Try to spray some starting fluid into the throttle body to see if the vehicle starts and then stalls. If it does, then look at the fuel injection for potential issues such as a computer not firing the injectors. If...

My car makes a loud screeching noise whenever I turn the ac on, it stops after a few seconds. Could this be a bad compressor?

Hi there: It is very possible that your AC compressor is the source of this type of noise. Much like other accessories driven by the engine’s belts, the AC compressor has several interior components and uses a sealed bearing to...

loss of pressure on acceleration and internal oil leak via burning oil

Hi there. Typically when your car is consuming this amount of oil at an incredible rate, it's caused by an internal engine fault, such as damaged cylinder head valve guides or piston rings.Although our mobile mechanics can often complete routine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com