Pontiac Bonneville Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(80)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(80)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Pontiac Bonneville Control Arm Assembly Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Pontiac BonnevilleV6-3.8L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1056.80Shop/Dealer Price$1257.73 - $1845.94
1994 Pontiac BonnevilleV6-3.8L TurboService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1040.58Shop/Dealer Price$1238.33 - $1824.16
1990 Pontiac BonnevilleV6-3.8LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$1040.58Shop/Dealer Price$1238.38 - $1824.24
2001 Pontiac BonnevilleV6-3.8L TurboService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1150.66Shop/Dealer Price$1299.77 - $1730.36
2003 Pontiac BonnevilleV6-3.8LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1150.66Shop/Dealer Price$1305.66 - $1740.68
1995 Pontiac BonnevilleV6-3.8LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$952.99Shop/Dealer Price$1149.84 - $1734.98
2002 Pontiac BonnevilleV6-3.8LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$741.89Shop/Dealer Price$885.81 - $1312.52
1996 Pontiac BonnevilleV6-3.8LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1040.58Shop/Dealer Price$1238.38 - $1824.23
Show example Pontiac Bonneville Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(80)

Rating Summary
73
6
1
0
0
73
6
1
0
0

Charles

5 years of experience
116 reviews
Charles
5 years of experience
Pontiac Bonneville V6-3.8L Turbo - Air is not coming out of vents - Madison, Tennessee
Very helpful, unfortunately unable to solve a/c problem .Checked out other problems .Gave me a good ideas where/how to pick the best services in area to help solve the issues. Punctual, cleanly dressed and able to express his thoughts clearly.

Jerome

35 years of experience
206 reviews
Jerome
35 years of experience
Pontiac Bonneville V6-3.8L - Car is not starting - Hyattsville, Maryland
Knowledgeable , and good customer service

Kevin

34 years of experience
234 reviews
Kevin
34 years of experience
Pontiac Bonneville V6-3.8L - Oil Change - Santa Monica, California

Noe

37 years of experience
604 reviews
Noe
37 years of experience
Pontiac Bonneville V6-3.8L - Car is not starting - Seattle, Washington

Excellent Rating

(80)

Rating Summary
73
6
1
0
0
73
6
1
0
0
Number of Pontiac Bonneville services completed
880+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

How to Register a Car in Illinois
All All vehicles must be registered through the Illinois Secretary of State’s (SOS) office. If you have just moved to Illinois, you must register your vehicle within 30 days in person at the SOS office. Auto insurance must be purchased...
5 Comfortable Sports Cars Your Parents Won't Complain About Riding In
The most comfortable sports cars combine high performance with a smooth ride. Options include the Alpina B6, Audi S8 Plus, and Mercedes-AMG S65.
Is It Safe to Drive With the Coolant Pressure Light On?
Your Coolant Pressure Light comes on when your engine is overheating due to insufficient coolant. So, can you drive safely with your...

Loud noise and tire locking up while driving. The left ball joint control arm is bad.

Hi there. Knowing the lower ball joint is bad leads me to believe that the really loud noise and wheel lock-up may be related. A bad lower ball joint (https://www.yourmechanic.com/services/ball-joint-front-replacement) typically will cause the vehicle to track (veer) towards any...

I bought a 2014 Hyundai Tucson a week ago from redmccombs and want to know when or how often does the timing chain and water pump

Hello. There is no time frame to change these parts on your vehicle. The timing chain is not a wear part and the water pump only gets changed when it is leaking. Most of these water pumps last about 100,000...

When i go to accerlate it dosent want to go sounds like its in neutral when it goes its ok unless i have yo stop and acceralte aga

Hi Bonnie. Thanks for contacting us today. A problem like this is probably caused by a transmission issue. In some cases, the issue is as simple as old or dirty transmission fluid that needs to be flushed. While in other...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com