Oldsmobile Delta 88 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Oldsmobile Delta 88 Power Steering Pressure Hose Replacement is $241 with $101 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Oldsmobile Delta 88V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$389.86Shop/Dealer Price$452.18 - $631.02
1990 Oldsmobile Delta 88V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.40 - $618.92
Show example Oldsmobile Delta 88 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
1
0
11
0
0
1
0

Daniel

10 years of experience
51 reviews
Daniel
10 years of experience
Oldsmobile Delta 88 V8-5.7L - Starter - Henderson, Nevada
DANIEL IS ABSOULUTELY THE BEST PROFESSIONAL AND RESPECTFUL . COURTEOUS INDIVIDUAL THAT I HAVE MET !!!! HIS DEMEANOR IS UNHEARD OF REGARDING AUTO MECHANICS THAT I HAVE EVER DEALT WITH . THEY USUALLY HAVE NASTY , SHITTY , CONDENCENDING ATTITUDES , AND ARE GENERALLY SCUMBAG ASSHOLES . HIS WORK ON MY VEHICLE WAS PERFECT AND 100 % SATISFACTORY . I HOPE TO GET DANIEL AGAIN THE NEXT TIME I USE YOUR SERVICE . I ALSO HOPE THAT IF I DO NOT , THE NEXT TIME SOON , THERE IS A PERSON LIKE HIM . HOWEVER , I PLAN ON USING ON ALWAYS USING DANIEL , THROUGH YOUR COMPANY . WHAT A GREAT PERSON !!!!!

Godwin

25 years of experience
253 reviews
Godwin
25 years of experience
Oldsmobile Delta 88 V6-3.8L - Pre-purchase Car Inspection - Temple City, California
Punctual, friendly, and knowledgeable. Godwin was amazing.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Oldsmobile Delta 88 V8-5.7L - Thermostat Housing Gasket - Torrance, California
Extremely knowledgeable and conscientious. Makes sure the job gets done right!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Oldsmobile Delta 88 V6-3.8L - Adjust Drive Belts - Laguna Hills, California
Chris was on scheduled time, he corrected my car's problem. I will definitely use your services in the future. Your company is now in my Bookmarks and I will recommend your services to my friends.

Excellent Rating

(12)

Rating Summary
11
0
0
1
0
11
0
0
1
0
Number of Oldsmobile Delta 88 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Replace a Ride Height Control Module
A bumpy ride, uneven ride height, or the illumination of the Air Ride Suspension Light may mean that the ride control module is faulty.
Veteran and Military Driver Laws and Benefits in Maryland
The The state of Maryland offers a number of benefits and perks for those Americans who have either served in an Armed Forces branch in the past, or are current active military members. Disabled veteran registration fee waiver Disabled veterans...
Why Do Tires Wear Unevenly?
Finding Finding out you need new tires often comes as a surprise and you may wonder how it’s possible that you need them already. You don’t speed. You don’t drive like a crazy person. You don’t mash the accelerator from...

What does the “Fuel level low” warning mean in the message center?

While you can easily see the fuel gauge in your car, Ford built in a couple of additional safeguards to help protect you from running out of gas on the road. It’s all too easy to overestimate how much gas...

Car stuck in park.

I have come across this often on your the Aviator. In some cases the shift cable comes loose from the transmission, but most of the time it is because the shift cable broke. The cable goes from the shifter, through...

No heat when it is cold outside?

Hello there, many faults will cause a lack of heat in your 2012 Ford Focus. When the air is not getting hot, the problem can either be with the air inside the car or a cooling system fault. The most...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com