Oldsmobile Delta 88 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Oldsmobile Delta 88 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1974 Oldsmobile Delta 88V8-5.7LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1982 Oldsmobile Delta 88V8-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Oldsmobile Delta 88V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1984 Oldsmobile Delta 88V8-5.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1980 Oldsmobile Delta 88V8-5.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1977 Oldsmobile Delta 88V8-4.3LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Oldsmobile Delta 88V6-3.8LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1982 Oldsmobile Delta 88V8-5.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Delta 88 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0

Godwin

24 years of experience
253 reviews
Godwin
24 years of experience
Oldsmobile Delta 88 V6-3.8L - Pre-purchase Car Inspection - Temple City, California
Punctual, friendly, and knowledgeable. Godwin was amazing.

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Oldsmobile Delta 88 V8-5.7L - Thermostat Housing Gasket - Torrance, California
Extremely knowledgeable and conscientious. Makes sure the job gets done right!

Kenneth

20 years of experience
777 reviews
Kenneth
20 years of experience
Oldsmobile Delta 88 V8-5.7L - Battery - Torrance, California
Kenneth was very punctual, professional and helpful. He fixed the problem and helped walk me through his inspection and identify other improvements need. I would definitely recommend him!

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Oldsmobile Delta 88 V6-3.8L - Power Window Switch Replacement (Driver Side Front) - Laguna Hills, California
Have used Chris on at least 4 occasions. He is a competent and well above average mechanic.

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0
Number of Oldsmobile Delta 88 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Performance Air Filter
Unlike Unlike cheaper paper air filters, performance filters are made of either foam or cloth (typically cotton). They’re more expensive, but they also last longer, in fact, depending upon the type and use level, a performance air filter may last...
P0085 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Low (Bank 2)
P0085 P0085 trouble code definition P0085 is in reference to the exhaust valve control solenoid circuit bank 2. This may be seen with P0084 and P0086. There are bank 2 and bank 1 solenoids. What the P0085 code means P0085...
How to Make a Cover for Your Car Seat
Car seat covers fit over the seats that come installed in your car. Make a custom car seat cover to add style and protect from food spills or grime.

why theres no fluid coming out on the bleeder

You may have to use a pressure or vacuum type of bleeder to get out the air in the system. Make sure that the master cylinder pedal is not adjusted too tightly. Also, ensure that the automatic adjuster is reset...

I have a 2003 toyota camry with "check engine" light on. I was told by one mechanic at Goodyear that it is due to catalytic conve

I think what the mechanic was telling you is that there are two different ways to replace a catalytic converter. The first way is to have factory type parts installed, that will normally come with the converter, and the adjoining...

Dead battery first time out in below zero weather

Your vehicle battery may be prone to weak batteries when the temperature drops below zero. Have the battery and charging system checked to make sure battery is good and system is charging the battery good. I would then recommend checking...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com