Oldsmobile 98 Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Oldsmobile 98 Valve Cover Gasket Replacement is $174 with $34 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Oldsmobile 98V6-3.8LService typeValve Cover Gasket ReplacementEstimate$285.12Shop/Dealer Price$307.19 - $362.06
1994 Oldsmobile 98V6-3.8L TurboService typeValve Cover Gasket ReplacementEstimate$272.51Shop/Dealer Price$292.10 - $345.12
1994 Oldsmobile 98V6-3.8LService typeValve Cover Gasket ReplacementEstimate$617.68Shop/Dealer Price$699.36 - $935.61
1993 Oldsmobile 98V6-3.8LService typeValve Cover Gasket ReplacementEstimate$617.68Shop/Dealer Price$699.35 - $935.61
1990 Oldsmobile 98V6-3.8LService typeValve Cover Gasket ReplacementEstimate$747.66Shop/Dealer Price$864.92 - $1200.98
1993 Oldsmobile 98V6-3.8L TurboService typeValve Cover Gasket ReplacementEstimate$272.51Shop/Dealer Price$292.33 - $345.52
1991 Oldsmobile 98V6-3.8LService typeValve Cover Gasket ReplacementEstimate$747.66Shop/Dealer Price$861.86 - $1195.62
1992 Oldsmobile 98V6-3.8L TurboService typeValve Cover Gasket ReplacementEstimate$272.51Shop/Dealer Price$292.14 - $345.18
Show example Oldsmobile 98 Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Efrain

21 years of experience
101 reviews
Efrain
21 years of experience
Oldsmobile 98 V6-3.8L - Brakes, Steering and Suspension Inspection - Bowie, Maryland
Good

Manuel

10 years of experience
56 reviews
Manuel
10 years of experience
Oldsmobile 98 V8-7.5L - Brake fluid is leaking - Thomasville, North Carolina
Excellent and very detailed...Will use again and again!

Travis

14 years of experience
691 reviews
Travis
14 years of experience
Oldsmobile 98 V6-3.8L - Oil/Fluid Leak - Minneapolis, Minnesota
Travis rocks!

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Oldsmobile 98 V6-3.8L - Oil Change - Northridge, California
We feel blessed to have met Lucas and have him as our mechanic. He always explains things very clearly, and he was so honest, there was no upselling or deception. He fixed the problem and so far the car is running very well, and we are so relieved. Being on a fixed income means its very important for us to have an honest mechanic and reasonable prices, so thankful to have met Lucas.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Oldsmobile 98 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P0291OBD-II Trouble Code: Cylinder 11 Injector Circuit Low
P0291 P0291 code definition When your vehicle’s PCM registers the P0291 code, it means that a voltage reading came from the fuel injector circuit – for cylinder number 11’s fuel injector – that doesn’t conform to the predetermined value referenced...
Cell Phones and Texting: Distracted Driving Laws in Colorado
Colorado Colorado defines distracted driving as any action you perform inside of your vehicle that takes your attention away from driving. These distractions include: Cell phones Electronics Eating or drinking Drivers who are under the age of 18 are not...
How Long Does a Traction Control Switch Last?
Traction Traction control helps to prevent the vehicle from losing traction while you are driving down the road. The traction control system is turned on when the throttle input and engine torque do not match the road surface conditions. Some...

How Long Should Headlight Fuses Last?

All fuses in your vehicle are technically designed under normal conditions to last the life of the vehicle. A fuses primary job is to open up if the current flowing through the circuit it is protecting exceeds its rated capacity....

Throttle position sensor reads 13% at idle and 75% fully open.

No, you can't start messing with those because there are all kinds of sensors. If you set that up in the throttle position sensor, it's going to get wrong reading, and may get the wrong amount of air and confuse...

oil mysteriously low

This is an ongoing issue with almost all of the manufacturers of engines and the oil consumptions they are having problems with. The dealer can do an oil consumption test and tell you that this is normal if it is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com