Oldsmobile 98 Car Heater Control Valve Replacement at your home or office.

On time and professional. Lucas did a great job. I highly recommend him and will be happy to have him handle my cars service needs in the future.

Mr. Richard was very knowledgeable on my car plus he knew how to fix it on a timely manner because I had to go get my lunch

The mobile mechanic came. I must say I am impressed! He found my house. He and I started talking. He said he owned two Ninety Eights previously. He was there to look at my Oldsmobile Ninety Eight. He had two Oldsmobile Ninety Eight Touring Sedans. The ones he owned were from the 1987-1990 era. He was describing the floor shifters and they had and how much he liked Ninety Eights, Touring Sedans, and the Oldsmobile Eighty Eight LSS too. He talked about how a family member owned one and how he was fixing his. He talked in detail about the Touring Sedan and the things he loved. He asked me how long had I owned my Ninety Eight. I told him 2003. He told me how he become a mechanic and went to school for it and more. He got into the Ninety Eight and it would not start. He got out and disconnected the battery and rubbed the negative and positive battery terminals together. He reconnected them and the Ninety Eight started! The instrumentation then told him exactly what it was. There is a sensor at the bottom of the oil pan. He said by doing what he did with the terminals, it cleared the computer and reset it. We went underneath the car and he showed me the sensor. He said which one did you replace? I told him. He said you were on the right path. You know what you are doing. You need to replace this sensor and not the one you did. You can get the sensor and replace it because it is clear you know what you are doing and on the right path. He said you also need to replace your valve cover gaskets. They are leaking. I told him I will request him to come back and do that. I am not doing that even thought I can.

Raymond is a very experienced mechanic. The problem is with this car is that the OBD reader is neither series 1 or 2, it is in between so the standard readers will not read the OBD codes. Raymond did some fuel and ignition test to discover what might be needed to correct the ignition issues.