Nissan Versa Note Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(123)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(123)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Nissan Versa Note Control Arm Assembly Replacement is $238 with $70 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$889.06Shop/Dealer Price$1019.94 - $1391.50
2015 Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$646.57Shop/Dealer Price$718.09 - $921.92
2017 Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$646.57Shop/Dealer Price$718.16 - $922.03
2014 Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$482.55Shop/Dealer Price$554.69 - $765.26
2016 Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$646.57Shop/Dealer Price$718.52 - $922.67
2016 Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$646.57Shop/Dealer Price$718.20 - $922.10
* Nissan Versa NoteL4-1.6LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$865.63Shop/Dealer Price$991.98 - $1360.15
Show example Nissan Versa Note Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(123)

Rating Summary
117
2
2
0
2
117
2
2
0
2

Chris

17 years of experience
419 reviews
Chris
17 years of experience
Nissan Versa Note L4-1.6L - Pre-purchase Car Inspection - Brisbane, California
Chris showed up early and was quick and efficient with his inspection. Thanks!

Drew

12 years of experience
17 reviews
Drew
12 years of experience
Nissan Versa Note L4-1.6L - Oil Change - Charlotte, North Carolina
Drew arrived in between his appointment time. He was courteous and efficient. He answered my questions, and was very professional.

Anthony

8 years of experience
195 reviews
Anthony
8 years of experience
Nissan Versa Note L4-1.6L - Trunk does not lock or open - Sacramento, California
I was very satisfied with the service. He was prompt and knowledgeable. Also friendly and very helpful in explaining what my options were.

Jesse

18 years of experience
219 reviews
Jesse
18 years of experience
Nissan Versa Note L4-1.6L - Car is overheating - San Antonio, Texas
Broke everything down that needed to be done and what is priority. Explained to me what the real problem was with my car.

Excellent Rating

(123)

Rating Summary
117
2
2
0
2
117
2
2
0
2
Number of Nissan Versa Note services completed
1353+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

The Traveler’s Guide to Driving in France
France France is on many people’s list of perfect vacation destinations. There are countless things to see and do (https://www.tripadvisor.com/Attractions-g187070-Activities-France.html). You can explore Paris and the Eiffel Tower. Spend time looking at the artwork in the Louvre, visit Notre Dame...
How to Put on Snow Chains
Putting snow chains on your car tires makes winter driving safe and easy. It's smart to practice installing snow chains before snow starts to fall.
How Long Does a Connector Hose Heater Control Valve Last?
The The hose heater control valve opens and allows hot coolant from the engine to blow into the heater core. After the vehicle gets to the correct temperature, the thermostat is opened and allows coolant to circulate through the engine....

What does it mean if the Low Tire Pressure Light on the dash comes on?

Your car is equipped with a tire pressure monitoring system (TPMS). It checks that each of your tires has the right amount of air. If it notices a drop in pressure, it will turn on the Low Tire Pressure Light...

grinding noise (not squealing) when brake

If the issue did not exist prior to the work being done, then the cause of the unusual noise is due to the pads and/or the interaction between the pads and the particular finish that was left on the rotor....

What does it mean when the eps light won't go off in your car?

If the EPS light is always on, it means the vehicle's computer is reporting a fault in the electronic power steering system. A mechanic can download the trouble codes from the computer that have caused the alert, and then follow...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com