Nissan Pulsar NX Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Nissan Pulsar NX Throttle Body Replacement is $548 with $310 for parts and $238 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Nissan Pulsar NXL4-1.6LService typeThrottle Body ReplacementEstimate$4091.08Shop/Dealer Price$5054.10 - $7929.37
Show example Nissan Pulsar NX Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(13)

Rating Summary
11
0
0
0
2
11
0
0
0
2

Sean

18 years of experience
111 reviews
Sean
18 years of experience
Nissan Pulsar NX L4-1.6L - Car is not starting - Waldorf, Maryland
I had a recurring problem with my older car that was not starting after sitting for a few days. Sean is very knowledgeable and explained the issues very clearly He analyzed the "new" battery and found a dead cell. He gave me a quote of other maintenance things I would need in the future.

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Nissan Altima L4-2.5L - Throttle Body - Woodland Hills, California
Lucas was a quintessential mechanic. If every automotive service provider could be like him, we would live in a perfect world. He performed the job as expected and let me know of some other things on my car that will need service very soon that I had not been aware of. I would definitely like for him to work on my car again the next time I need a major service!

Travis

16 years of experience
165 reviews
Travis
16 years of experience
Nissan Altima V6-3.5L - Throttle Body - Irving, Texas
Travis is an excellent mechanic.!! He explained every step of the process. He wasted no time in getting to work and resolving the issue. He asked questions and was very knowledgeable. I would recommend Travis to any person using this service. I will definitely ask for Travis on any car repairs I may have in the future.

James

27 years of experience
184 reviews
James
27 years of experience
Nissan Altima L4-2.5L - Throttle Body - Nashville, Tennessee
Very helpful and on time

Excellent Rating

(13)

Rating Summary
11
0
0
0
2
11
0
0
0
2
Number of Nissan Throttle Body Replacement services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0154 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 2 Sensor 1)
P0154 trouble code definition 02 Sensor Circuit No Activity Detected (Bank 2 Sensor 1) What the P0154 code means The oxygen sensor’s...
10 Best Stores to Buy Auto Parts in Baltimore, Maryland
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Baltimore is Advance Auto Parts.
The Guide to Right-of-Way Laws in Alabama
Alabama Alabama defines “right-of-way” as the right to move across or onto a roadway before other vehicles or people. Right-of-way laws are in place to facilitate smooth, safe traffic flow, and violating them is one of the most common causes...

Windshield wipers less effective when I'm driving fast

Hello. It is possible that air is getting under the windshield wipers, making them ineffective. Although it is more likely that the windshield wiper arms are getting bent and/or have worn out (https://www.yourmechanic.com/article/top-5-reasons-your-windshield-wipers-aren-t-working). Sometimes the windshield wipers can be bent...

Truck won't start after replacing fuel pump and filter. It acts like it has no spark - 2000 Jeep Grand Cherokee

If the motor started and ran for five minutes, it is highly unlikely that it has no spark. You may want to consider checking the fuel pressure regulator. As you may know, this is responsible for helping maintain the correct...

Hi i have an issue with my heat. When I drive its warm but if I stop and a light or stop sign it starts blowing cold air. In park there's no heat till I rev it up. I have replaced water pump 2x, heater core, and put a new [thermostat](/topics-thermostat-jeep/) in it.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com