Nissan Pickup Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Nissan Pickup Brake Hose Replacement is $204 with $43 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Nissan PickupL4-2.4LService typeBrake Hose - Passenger Side Front ReplacementEstimate$292.84Shop/Dealer Price$334.19 - $419.96
1995 Nissan PickupL4-2.4LService typeBrake Hose - Driver Side Front ReplacementEstimate$264.62Shop/Dealer Price$307.44 - $397.57
1996 Nissan PickupL4-2.4LService typeBrake Hose - Driver Side Rear ReplacementEstimate$250.46Shop/Dealer Price$289.74 - $369.25
1995 Nissan PickupV6-3.0LService typeBrake Hose - Driver Side Front ReplacementEstimate$267.10Shop/Dealer Price$310.50 - $402.46
1996 Nissan PickupL4-2.4LService typeBrake Hose - Driver Side Front ReplacementEstimate$267.10Shop/Dealer Price$310.57 - $402.57
1997 Nissan PickupL4-2.4LService typeBrake Hose - Driver Side Rear ReplacementEstimate$250.46Shop/Dealer Price$289.74 - $369.25
1997 Nissan PickupL4-2.4LService typeBrake Hose - Passenger Side Rear ReplacementEstimate$258.96Shop/Dealer Price$298.01 - $377.34
1995 Nissan PickupL4-2.4LService typeBrake Hose - Passenger Side Front ReplacementEstimate$267.34Shop/Dealer Price$309.12 - $395.21
Show example Nissan Pickup Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(34)

Rating Summary
32
0
0
0
2
32
0
0
0
2

Caster

28 years of experience
176 reviews
Caster
28 years of experience
Nissan Pickup V6-3.0L - Starter - Novato, California
Caster was a great help in fixing my truck. I knew it wasn't going to be easy and he patiently took his time to figure out the best solution. Remove a starter motor...sounds easy ??!!!....try getting it out of my truck !!!! Caster did it....Thanks again

Tien

23 years of experience
903 reviews
Tien
23 years of experience
Nissan Pickup L4-2.4L - Car is not starting - Oakland, California
Great! He could have given up or just diagnosed the problem without fixing it. Instead he persevered until it was fixed. Very happy!

Richard

20 years of experience
126 reviews
Richard
20 years of experience
Nissan Pickup L4-2.4L - Starter - Fort Worth, Texas
Richard has worked on my truck twice, both times he was very quick and efficient. Was on time, if not early to the appointments and always made sure you were satisfied with the work before leaving. Would definitely ask for him again.

Peter

43 years of experience
1321 reviews
Peter
43 years of experience
Nissan Pickup L4-2.4L - Starter - Gilbert, Arizona
He did a very good job.

Excellent Rating

(34)

Rating Summary
32
0
0
0
2
32
0
0
0
2
Number of Nissan Pickup services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

2012 Nissan Sentra vs. 2012 Nissan Altima: Which One Should I Buy?
When you consider the Nissan Sentra versus the Nissan Altima, you need to realize that you’re crossing between two different classes of vehicle: the Altima is a mid-size sedan while the Sentra is a compact sedan. The differences between the...
The Guide to Legal Car Modifications in Idaho
ARENA Creative / Shutterstock.com Whether you live in the state or are planning to move there, Idaho has regulations that cover vehicle modifications that you must follow to ensure that your vehicle is considered street legal when...
How To Jumpstart Your Car
A how-to guide to jumpstart your vehicle in the event of a dead battery. You'll need jumper cables, safety glasses, and a properly starting car.

stalls when braking/turning

You have definitely thrown a lot of parts at the truck. Some may have been necessary, but some may not have been. Based on your current symptoms, it sounds like the Manifold Absolute Pressure, or MAP sensor, may be to...

Engine, brake, cruise, traction control lights all came on at the same time and the dealership stated it is a fault of the coils

Hello, thank you for writing in. Typically when you replace coils, although it may not be the most comfortable option cost wise, you want to replace all of them. While there is no rule against replacing one or two of...

My back left light is very dim and the turn signal doesn't work

The wire connection at the turn signal multifunction switch should be checked for heat related damage and replaced with a new multifunction turn signal switch. The switch goes bad but also the connector can be damaged also at the same...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com