Nissan Frontier Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(565)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(565)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Nissan Frontier Throttle Body Replacement is $588 with $448 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2016 Nissan FrontierV6-4.0LService typeThrottle Body ReplacementEstimate$1694.06Shop/Dealer Price$2082.43 - $3239.42
2007 Nissan FrontierL4-2.5LService typeThrottle Body ReplacementEstimate$1745.91Shop/Dealer Price$2147.72 - $3349.04
2006 Nissan FrontierV6-4.0LService typeThrottle Body ReplacementEstimate$1702.13Shop/Dealer Price$2093.02 - $3261.52
2002 Nissan FrontierV6-3.3LService typeThrottle Body ReplacementEstimate$1099.71Shop/Dealer Price$1326.14 - $1999.58
2001 Nissan FrontierV6-3.3L TurboService typeThrottle Body ReplacementEstimate$1099.71Shop/Dealer Price$1328.20 - $2003.19
2014 Nissan FrontierV6-4.0LService typeThrottle Body ReplacementEstimate$1703.83Shop/Dealer Price$2095.29 - $3265.17
2012 Nissan FrontierV6-4.0LService typeThrottle Body ReplacementEstimate$1702.13Shop/Dealer Price$2093.04 - $3261.55
2007 Nissan FrontierV6-4.0LService typeThrottle Body ReplacementEstimate$1702.13Shop/Dealer Price$2093.02 - $3261.52
Show example Nissan Frontier Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(565)

Rating Summary
522
17
9
4
13
522
17
9
4
13

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Nissan Frontier V6-3.3L - Knock Sensor - Lynnwood, Washington
Will work to get your car fixed. Thanks

Jose

16 years of experience
213 reviews
Jose
16 years of experience
Nissan Frontier V6-4.0L - Window Motor / Regulator Assembly Replacement (Driver Side Front) - Cumming, Georgia
Great

Lucas

30 years of experience
938 reviews
Lucas
30 years of experience
Nissan Frontier L4-2.5L - Spark Plugs - Van Nuys, California
Perfect!

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Nissan Frontier L4-2.4L - Brake Caliper Replacement (Driver Side Front) - Gilbert, Arizona
very good.

Excellent Rating

(565)

Rating Summary
522
17
9
4
13
522
17
9
4
13
Number of Nissan Frontier services completed
6215+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

The Guide to Right-of-Way Laws in Georgia
Traffic Traffic laws exist to keep you safe. If you fail to obey them, then you could end up in a crash that could damage or total your vehicle, and cause serious injuries or even death. Most traffic accidents occur...
Understanding the Mercury Intelligent Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mercury Intelligent Oil Life Monitor indicates when and what service your car needs.
How to Troubleshoot a Car That Makes a Loud Screeching Sound When it Starts
Cars make a screeching sound when serpentine belts slip or crack. Lubricate car belts or have them replaced to fix the screeching noise.

Clutch does not engage and I cannot shift gears.

Hello and thanks for the question. Your problem could actually be linked to two separate systems, one would be the hydraulic system consisting of the clutch master cylinder and the slave cylinder located at or inside the bell housing of...

Humming/whirring sound only when accelerating.

It is possible that you have a wheel bearing issue (https://www.yourmechanic.com/services/wheel-bearings-replacement). It is usually worse when cornering in one direction and gets better when turning the other direction if it's just one bearing. The brake noise could be the return...

When I have the clutch in and turn steering wheel there is a noise.

Hi and thanks for contacting YourMechanic. Check to see if the belt and tensioner (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement) is working and the belt has no cracks. If there are cracks in the belt, then replace the belt. If the belt seems to be...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com