Nissan D21 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Nissan D21 Fuel Injector Replacement is $660 with $520 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Nissan D21L4-2.4LService typeFuel Injector ReplacementEstimate$1195.18Shop/Dealer Price$1458.83 - $2241.66
1990 Nissan D21V6-3.0LService typeFuel Injector ReplacementEstimate$2011.67Shop/Dealer Price$2417.53 - $3623.56
1993 Nissan D21L4-2.4LService typeFuel Injector ReplacementEstimate$1186.17Shop/Dealer Price$1448.07 - $2229.60
1991 Nissan D21L4-2.4LService typeFuel Injector ReplacementEstimate$1186.17Shop/Dealer Price$1448.07 - $2229.60
1992 Nissan D21V6-3.0LService typeFuel Injector ReplacementEstimate$2011.67Shop/Dealer Price$2421.72 - $3630.89
1993 Nissan D21V6-3.0LService typeFuel Injector ReplacementEstimate$2011.67Shop/Dealer Price$2417.99 - $3624.36
1994 Nissan D21V6-3.0LService typeFuel Injector ReplacementEstimate$2011.67Shop/Dealer Price$2417.64 - $3623.75
1991 Nissan D21V6-3.0LService typeFuel Injector ReplacementEstimate$2011.67Shop/Dealer Price$2417.60 - $3623.67
Show example Nissan D21 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(50)

Rating Summary
46
1
0
1
2
46
1
0
1
2

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Nissan D21 L4-2.4L - Distributor - Grayson, Georgia
Best ever

Jonathan

18 years of experience
138 reviews
Jonathan
18 years of experience
Nissan D21 L4-2.4L - Car Starter Repair - Fountain Hills, Arizona
Could not have more pleased. On time, professional, Great job with our new starter. I'll use this service again.

Joe

1 years of experience
13 reviews
Joe
1 years of experience
Nissan D21 V6-3.0L - Clutch Slave Cylinder - Newalla, Oklahoma
great helpful fast

Keven

8 years of experience
187 reviews
Keven
8 years of experience
Nissan D21 L4-2.4L - Oil Change - Tacoma, Washington
Keven is a very professional and friendly mechanic

Excellent Rating

(50)

Rating Summary
46
1
0
1
2
46
1
0
1
2
Number of Nissan D21 services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Buy a Car Using Your Home Equity Line of Credit (HELOC)
Buying a new or used car often means that you must find financing (https://www.yourmechanic.com/article/5-essential-things-to-know-about-car-loans). Most often this is either through the dealership, a bank, or an online lender. While most lenders charge a high interest rate when taking out a...
Is it Safe to Drive With an Exhaust Leak?
Your vehicle’s exhaust system keeps the car quiet and the exhaust fumes away from the cabin. Furthermore, the system helps...
P0172 OBD-II Trouble Code: System Too Rich (Bank 1)
P0172 code definition? P0172 is a trouble code that is set when the ECU senses that there may be too much gasoline...

Emergency brake in 2006 Jeep Grand Cherokee stuck

Hello. If your Jeep feels like it is slowing down on its own, then the brakes may be binding. It may have to do with the parking brake or it can be something else. I would typically get the vehicle...

Error codes P0131 and P0151

Hi there: It would be best for you to review these two links; the first describes what the P0151 OBD-II Trouble Code (https://www.yourmechanic.com/article/p0151-obd-ii-trouble-code-o2-sensor-circuit-low-voltage-bank-2-sensor-1-by-jay-safford) is and what typically causes it, and second, the P0131 code (https://www.yourmechanic.com/article/p0131-obd-ii-trouble-code-oxygen-sensor-fault) and what it means.

2013 chevy impala battery save mode and won't allow the car to pass 40 mph

Hi There, This can be caused by a loose battery cable (https://www.yourmechanic.com/services/battery-cable-replacement) which is often times the problem. Try checking to be sure they are connected properly. Also, there is a sensor that has 3 small wires running to it...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com