Nissan Armada Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(199)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(199)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Nissan Armada Fuel Injector Replacement is $1628 with $1432 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3080.32Shop/Dealer Price$3801.19 - $5952.46
2015 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3073.45Shop/Dealer Price$3793.28 - $5947.00
2014 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3073.45Shop/Dealer Price$3793.31 - $5947.06
2018 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3562.83Shop/Dealer Price$4405.04 - $6925.82
2007 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3067.71Shop/Dealer Price$3788.20 - $5939.19
2012 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3067.71Shop/Dealer Price$3786.33 - $5935.92
2008 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3067.71Shop/Dealer Price$3786.16 - $5935.62
2006 Nissan ArmadaV8-5.6LService typeFuel Injector ReplacementEstimate$3067.71Shop/Dealer Price$3786.14 - $5935.58
Show example Nissan Armada Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(199)

Rating Summary
187
8
0
2
2
187
8
0
2
2

David

17 years of experience
639 reviews
David
17 years of experience
Nissan Armada V8-5.6L - Heater is not working - Brentwood, California
Professional and knowledgeable.

Travis

5 years of experience
18 reviews
Travis
5 years of experience
Nissan Armada V8-5.6L - Oil Change - Hollywood, Florida
Professional and Efficient

Charles

35 years of experience
342 reviews
Charles
35 years of experience
Nissan Armada V8-5.6L - Power Steering Pump - Round Rock, Texas
Timely And professional

Hiram

26 years of experience
55 reviews
Hiram
26 years of experience
Nissan Armada V8-5.6L - Brake Pads Replacement (Front, Rear) - Humble, Texas
Called to confirm appointment. Was a joy to talk to. My first time using this service glad he was my mechanic.

Excellent Rating

(199)

Rating Summary
187
8
0
2
2
187
8
0
2
2
Number of Nissan Armada services completed
2189+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0118 OBD-II Trouble Code: Engine Coolant Temperature (ECT) Sensor Circuit High Open Problem
P0118 code definition Engine Coolant Temperature (ECT) sensor circuit high open problem What the P0118 code means P0118 is the OBD-II generic...
How to Buy a Good Quality Fuse
Fuses Fuses can be the heart of the vehicle’s power center, keeping everything running correctly by routing electrical power where it belongs. The power center is a vast improvement over the random locations of fuses and relays in vehicles that...
What Do Hose Clamps Do?
Hoses Hoses are used throughout the engine, any time there’s a need to transport fluid from one point to another. Your radiator uses hoses, your heater uses hoses (it’s technically part of the coolant system). Your power steering system uses...

Temperature sensor

Hi There, It sounds like you may have a faulty coolant temperature sensor (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) which may be providing a false reading to the temperature gauge. When the car is cold, it relies heavily on the engine coolant temperature sensor. If...

Transmission problem?

It sounds like you may have a problem with voltage draw regarding the switches and interior lights inside the vehicle. The jumping/jerking reaction when putting the car in drive may be related to low transmission fluid. This can happen for...

What's wrong when the battery light and the brake light comes on then the car starts running weird the dashboard lights go off the

The problem sounds like the alternator stopped charging and caused you to slowly start to loose power and then engine died and would not restart unless you jump start the car or recharge the battery. You will need to test...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com