Nissan Altima Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(11)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(11)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Nissan Altima Mass Airflow Sensor Replacement is $280 with $185 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Nissan AltimaL4-2.4LService typeMass Airflow Sensor ReplacementEstimate$570.01Shop/Dealer Price$693.77 - $1042.53
2000 Nissan AltimaL4-2.4LService typeMass Airflow Sensor ReplacementEstimate$550.01Shop/Dealer Price$673.78 - $1022.56
2003 Nissan AltimaV6-3.5LService typeMass Airflow Sensor ReplacementEstimate$691.45Shop/Dealer Price$850.58 - $1305.44
2018 Nissan AltimaL4-2.5LService typeMass Airflow Sensor ReplacementEstimate$659.23Shop/Dealer Price$810.29 - $1240.96
1993 Nissan AltimaL4-2.4LService typeMass Airflow Sensor ReplacementEstimate$665.59Shop/Dealer Price$818.27 - $1253.75
2008 Nissan AltimaL4-2.5LService typeMass Airflow Sensor ReplacementEstimate$465.85Shop/Dealer Price$568.58 - $854.24
2007 Nissan AltimaL4-2.5L HybridService typeMass Airflow Sensor ReplacementEstimate$470.85Shop/Dealer Price$573.45 - $859.00
1996 Nissan AltimaL4-2.4LService typeMass Airflow Sensor ReplacementEstimate$658.29Shop/Dealer Price$808.12 - $1234.54
Show example Nissan Altima Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(11)

Rating Summary
9
1
0
0
1
9
1
0
0
1

Joe

0 years of experience
528 reviews
Joe
0 years of experience
Altima 2010 - Mass Airflow Sensor - Nashville, TN
Joe was awesome

Miguel

19 years of experience
165 reviews
Miguel
19 years of experience
Altima 2012 - Mass Airflow Sensor - Belleville, NJ
Very knowledgeable! Would recommend

Chris

13 years of experience
490 reviews
Chris
13 years of experience
Altima 2012 - Mass Airflow Sensor - Houston, TX
Does a great job. Would definitely book him again.

Nathan

13 years of experience
12 reviews
Nathan
13 years of experience
Altima 2013 - Battery - Eugene, OR
Nathan was great , he fixed my issues and was very upfront and honest .

Excellent Rating

(11)

Rating Summary
9
1
0
0
1
9
1
0
0
1
Number of Nissan Altima Mass Airflow Sensor Replacement services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How Long Does an EGR Temperature Sensor Last?
Are Are you familiar with the EGR (exhaust gas recirculation) system in your car? If not, this is something all modern cars have. The purpose of this system is to greatly reduce the amount of emissions produced by your car....
How Long Does a Mass Airflow Sensor Last?
The The right amount of air and fuel in your engine is a vital component in keeping the engine running as it should. Making sure that all of the vital components of the air and fuel system are running at...
How to Replace an Injector Control Pressure Sensor
Diesel engines have an injector control pressure sensor that fails when there is hard starting, decreased power, or an illuminated Check Engine Light.

Getting a "Drivetrain Malfunction" light on a 2011 535i. Had a sensor replaced for almost $400 and that didnt fix the issue. wha

Hello. The drive train malfunction light indicates the computer has detected an issue with the vehicle's drive train or transmission. This can be caused by many things, ranging from a bad sensor, to the need for a new transmission. As...

Oil leak behind oil filter

There should be an oil pressure sensor (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) located near the filter housing. Check to see if there is a leak at the sensor. At idle, there should be about 15PSI of pressure and about 50-60PSI at around 3,000 RPM's....

Getting error code p0340 on my 2002 Ford Taurus DOHC 3.0

Hi - yes, you are correct. This error code (P0340 (https://www.yourmechanic.com/article/p0340-obd-ii-trouble-code-camshaft-position-sensor-circuit-malfunction-by-jamahl-walker)) means either the sensor, or the wiring and connectors for this sensor, are malfunctioning. Check the wiring connection for the sensor first, but most likely, the sensor has failed....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com