Mitsubishi Mighty Max Headlight Bulb Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Headlight Bulb Replacement Service

How much does a Headlight Bulb Replacement cost?

On average, the cost for a Mitsubishi Mighty Max Headlight Bulb Replacement is $161 with $21 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$208.10Shop/Dealer Price$224.98 - $267.50
1990 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.20 - $255.40
1995 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
1996 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
1991 Mitsubishi Mighty MaxV6-3.0LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$215.70 - $258.02
1993 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side High Beam ReplacementEstimate$199.09Shop/Dealer Price$214.36 - $255.69
1992 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Driver Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.24 - $255.47
1993 Mitsubishi Mighty MaxL4-2.4LService typeHeadlight Bulb - Passenger Side Low Beam ReplacementEstimate$199.09Shop/Dealer Price$214.22 - $255.44
Show example Mitsubishi Mighty Max Headlight Bulb Replacement prices

What are headlight bulbs and how do they work?

Headlight bulbs are encased in a carefully designed housing that illuminates the roadways and makes your car visible to other drivers and pedestrians. They rely on the vehicle’s electrical system for power. There are many types of headlight bulbs in use today including sealed beams, halogen plug-in bulbs, LED (light emitting diode), and HID (high intensity discharge) bulbs. Some car models are sold with headlight options and a mechanic may rely on your car’s VIN to determine the type of headlight system in your vehicle.

All headlamps rely on reflectors in the lamp housing to focus the headlight bulbs. This allows the most useful pattern of light to be cast onto the roadway. Halogen bulbs have a gas that allows for additional light. HID bulbs use two electrodes within the bulb that charge the gas to produce the light. LED bulbs operate at a lower temperature and the light shown on the road tends to be lower than HID bulbs. All headlights are designed to provide a well lit driving path when natural sunlight is not enough.

When to replace headlight bulbs?

  • Bulb is blown out. All of the various headlight bulb types are replaced if the bulb itself has failed. This is the most common scenario.
  • Bulb has dimmed. Some bulb types, particularly halogen bulbs, will produce significantly less light output as the bulb filament ages from use. LED and HID lighting do not dim with age and thus are generally only serviced if the light source has failed.
  • Headlight circuit fails. Note that in some cases, the bulbs are not the underlying issue that leads to the need for replacements. Instead wiring to the bulb, terminal connections, bulb sockets, and system components could be the underlying problem.

How do mechanics replace headlight bulbs?

  • Halogen bulbs and sealed beams, which are generally modular plug in components, are accessible once the hood is raised.
  • The replacement procedure for LED and HID bulbs will depend on whether the light source itself is faulty or if it’s a component in the circuit. Removal procedures for sophisticated HID and LED systems vary by car model and mechanics follow the repair procedures in the factory service manual for your model.
  • For all bulb types, wiring and bulb sockets must be carefully inspected when replacing bulbs to ensure that the electrical connections are complete and secure.
  • Finally, the installed newly bulbs are turned on to ensure normal operation.

Is it safe to drive with a headlight problem?

Headlights must always be fully functional after dusk to drive safely. Should your car have a failed headlight and is driven only when there is adequate daylight, you can put off the repair until it is convenient. Working headlights are required by law in throughout the U.S. whenever the car is used on public roads from sunset to sunrise and in many other specified conditions as well, such as when it is raining or when visibility is reduced due to smoke, fog, or other factors.

When replacing headlights keep in mind:

  • If a bulb does not have a visible filament that can inspected and tested, a mechanic might first test to see if there is power to the bulb. This is most applicable if your car has LED or HID lighting, which can fail if electronics in the circuit is faulty.
  • Halogen lamps and sealed beams should be replaced in pairs so that illumination levels are equal on both sides of the car.
  • Plastic lenses on many headlights degrade over time. Should there not be any issues with the bulbs, these can be replaced to restore your vehicle’s lighting system to a like new condition.
  • The condition of bulb sockets, the ground connection, fuses, and all components of the headlight circuit are important to proper and reliable functioning of the headlights and a mechanic should consider those aspects.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(13)

Rating Summary
11
0
0
1
1
11
0
0
1
1

Grzegorz

42 years of experience
473 reviews
Grzegorz
42 years of experience
Mitsubishi Mighty Max L4-2.0L - Car is not starting - San Francisco, California
He was fine seemed very knowledgeable

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Mitsubishi Mighty Max L4-2.6L - Tune-up - Lynnwood, Washington
Quick and gave good advice.

Robert

19 years of experience
68 reviews
Robert
19 years of experience
Mitsubishi Mighty Max L4-2.0L - Fuel Pump - Phoenix, Arizona
Came by got the job done!

Peter

44 years of experience
1397 reviews
Peter
44 years of experience
Mitsubishi Mighty Max L4-2.0L - Brake System Flush - Glendale, Arizona
Fantastic as always, very friendly guy. Always shows up early, explained the process. AND even tightened bolts up I had no idea were loose..... Thank you

Excellent Rating

(13)

Rating Summary
11
0
0
1
1
11
0
0
1
1
Number of Mitsubishi Mighty Max services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
800+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
The Best Used Cars to Buy If You’re a Photographer
If If you are a photographer, and you’re considering buying a used car, the big thing to consider is the type of photography you do. Thanks to the advances in digital photography, chances are you’re not hauling around a lot...
How to Renew Your Car Registration in Virginia
Like Like all other states, Virginia requires vehicle owner to register their vehicles, and then to renew their registration each year. Registration is important for a number of different things, including ensuring that you’re current on your automotive taxes (your...

Check Engine Light comes on in hot weather

Hello. The Check Engine Light will come on any time that the computer sees a problem with the powertrain in the vehicle. In order to know where the issue is coming from I would need to scan the computer for...

Throttle Position Sensor

You replaced the accelerator pedal and the throttle body itself. The throttle position sensor (TPS) is a sensor that is located on the throttle body used to monitor the throttle position of the throttle plate inside the throttle body in...

2006 Jeep Commander horn problem

Hi there. Check the wiring from the horn button to the horn and see if there is any loose wiring or any burned wires. If all the wiring looks good, then the issue is within the steering column. The horn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com