Mitsubishi Lancer Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(18)

Brake Pad Replacement Estimate for Mitsubishi Lancer

Mitsubishi Lancer Brake Pad Replacement costs $189 on average.

CarServiceEstimateShop/Dealer Price
2003 Mitsubishi LancerL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$287.05Shop/Dealer Price$342.43 - $472.32
2009 Mitsubishi LancerL4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$251.03Shop/Dealer Price$303.93 - $426.32
2006 Mitsubishi LancerL4-2.4LService typeBrake Pads - Front ReplacementEstimate$251.03Shop/Dealer Price$303.93 - $426.32
2010 Mitsubishi LancerL4-2.0LService typeBrake Pads - Front ReplacementEstimate$251.03Shop/Dealer Price$303.90 - $426.27
2013 Mitsubishi LancerL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$243.03Shop/Dealer Price$294.71 - $416.18
2016 Mitsubishi LancerL4-2.4LService typeBrake Pads - Front ReplacementEstimate$227.03Shop/Dealer Price$276.21 - $395.80
2017 Mitsubishi LancerL4-2.0LService typeBrake Pads - Front ReplacementEstimate$230.55Shop/Dealer Price$279.22 - $397.60
2013 Mitsubishi LancerL4-2.4LService typeBrake Pads - Front ReplacementEstimate$259.05Shop/Dealer Price$313.50 - $442.68
Show example Mitsubishi Lancer Brake Pad Replacement prices

Brake Pad Replacement Service

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(18)

Rating Summary
17
0
1
0
0
17
0
1
0
0

Raymond

25 years of experience
137 reviews
Raymond
25 years of experience
Lancer 2007 - Brake Pads - Victorville, CA
Came 5 minutes early, nice. Did the work in a timely manner.

Dwight

14 years of experience
29 reviews
Dwight
14 years of experience
Lancer 2006 - Brake Pads - Hayward, CA
arrived on time and very good at his work.

Jordan

7 years of experience
16 reviews
Jordan
7 years of experience
Lancer 2002 - Brake Wheel Cylinder - Winter Haven, FL
Jordan is a cut above the rest, he does a fantastic job and is super knowledgeable about cars and repairs. My brakes are like new and we feel very safe knowing Jordan did the job.His work is exceptional and we feel very lucky to have him as our mechanic. He will be back next week for the third job on our car.

Luis

3 years of experience
32 reviews
Luis
3 years of experience
Lancer 2002 - Oil Pan - Petersburg, VA
Luis is an outstanding mechanic to service you vehicle, gets the job done, reliable and great person.

Excellent Rating

(18)

Rating Summary
17
0
1
0
0
17
0
1
0
0
Number of Mitsubishi Lancer Brake Pads Replacement services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Toyota 4Runner
The The 2012 Toyota 4Runner was made for people with an active lifestyle. Its design is made to be a light off road alternative to the Jeep Grand Cherokee and the Ford Explorer. Key Features The Toyota 4Runner has...
2012 Toyota Tacoma vs. 2012 Nissan Frontier: Which One Should I Buy?
The smaller truck category includes those vehicles for men (and women!) who just want to scoot around town but who are opposed to driving a small car and just prefer a truck. These relatively fuel-efficient vehicles offer little in the...
How to Rebuild a Car Engine
Whether Whether it is to breathe new life into a commuter or work vehicle, or for hobby in a classic car, there are many cases in which rebuilding an engine can be a great alternative to replacing one. Generally speaking,...

This is more of a shop question.

You would need to first see which one the mechanics can give you the most productive work. Equipment will increase work productivity if the equipment you have now slows the mechanics by taking longer to do a job. A POS...

98 camry starter clicking and the battery and starter is good.

Hi there. Check the battery cables and make sure that they are tight and clean. Check the battery for a load test. The battery should not drop more than 11.5 volts during a voltage drop test. If the battery does...

My 2009 Cadillac cts starts and drives maybe like a mile before my wheel locks and car shut off....and now it has completely shut

Hi There, Depending on whether or not the vehicle will turn over will determine what the next step should be. If the engine does not turn over, I would recommend checking all connections related to the battery and check to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com