Mercury Mariner Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(157)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(157)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Mercury Mariner Wheel Bearings Replacement is $198 with $74 for parts and $123 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercury MarinerL4-2.5LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$332.96Shop/Dealer Price$386.21 - $509.95
2009 Mercury MarinerL4-2.5LService typeWheel Bearings - Driver Side Front ReplacementEstimate$300.96Shop/Dealer Price$354.24 - $478.00
2009 Mercury MarinerV6-3.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$300.96Shop/Dealer Price$354.24 - $477.99
2011 Mercury MarinerL4-2.5L HybridService typeWheel Bearings - Passenger Side Front ReplacementEstimate$272.47Shop/Dealer Price$322.71 - $444.19
2008 Mercury MarinerV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$300.96Shop/Dealer Price$354.26 - $478.04
2010 Mercury MarinerV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$300.96Shop/Dealer Price$354.24 - $477.99
2009 Mercury MarinerL4-2.5L HybridService typeWheel Bearings - Passenger Side Front ReplacementEstimate$278.97Shop/Dealer Price$329.06 - $450.43
2011 Mercury MarinerV6-3.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$308.96Shop/Dealer Price$362.62 - $486.66
Show example Mercury Mariner Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(157)

Rating Summary
148
7
1
0
1
148
7
1
0
1

Ruben

17 years of experience
169 reviews
Ruben
17 years of experience
Mercury Mariner L4-2.3L - Oil Change - Pineville, North Carolina
Ruben was the Nicest person i have ever had the pleasure of working with in the auto mechanic industry! I would highly recommend his service to anyone that wants a reliable mechanic and trustworthy positive energy! Great experience!

Michael

16 years of experience
606 reviews
Michael
16 years of experience
Mercury Mariner L4-2.3L Hybrid - Car does not shift from park to drive Inspection - Marietta, Georgia
Booked appointment online, Michael texted me if he can two hours earlier and I said ok. Then he came on time and found the problem with shift interlock solenoid after a couple of diagnostics. He tried to order part from dealer but it is discontinued. He also suggested me to buy a used one. Very nice and professional. Thanks!

Victor

35 years of experience
226 reviews
Victor
35 years of experience
Mercury Mariner L4-2.3L Hybrid - Car is getting worse gas mileage Inspection - Albuquerque, New Mexico
He was excellent, he went over everything he checked and explained it so I was able to understand everything he said.

David

36 years of experience
195 reviews
David
36 years of experience
Mercury Mariner L4-2.3L - Oil Pan Gasket - Los Angeles, California
Very friendly person and experienced in what he knows. Would recommend him. Also if I need any other, would like to ask for him.

Excellent Rating

(157)

Rating Summary
148
7
1
0
1
148
7
1
0
1
Number of Mercury Mariner services completed
1727+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

How Long Does a Horn Relay Last?
Having Having a fully functional horn is an essential part of staying safe while driving. The horn on your vehicle will allow you to alert other drivers of your presence and can be used to prevent accidents in some instances....
The Guide to Colored Curb Zones in Arizona
Drivers Drivers in Arizona need to pay close attention to all of the various parking laws to make sure they do not leave their car in an area where it is not allowed. If you park in a prohibited area,...
How to Remove Cylinder Head Bolts
Removing Removing the head is a major step in removing the cylinder head (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-cylinder-head). These head bolts hold the cylinder head to the engine block. The head bolts are long bolts that go through the cylinder head and head gasket...

Car won't start - Nissan Altima

You may want to also check a few other things, such as fuel to the injectors (https://www.yourmechanic.com/services/fuel-injector-replacement), spark plugs (https://www.yourmechanic.com/services/spark-plugs-replacement), or ignition coils (https://www.yourmechanic.com/services/ignition-coil-replacement). You could begin by removing a spark plug after cranking it to see if it is...

My car won't start and the word fuse is lighting up on my cluster. What does it mean?

Hi there. The fuse light will come on if the engine is not starting up for more than 15 seconds. This is a fail safe light that warns the driver that the starting circuit has a fault and needs attention....

Gauges on 2002 Jeep from Scotland do not work. It has a red kill switch. How do you remove the kill switch?

Hi there. When you wiggle the wires to the kill switch and the gauges start to work, then the contacts inside the switch could be broken. You could replace the kill switch with a toggle switch that will do the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com