Mercedes-Benz SLK300 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

customer ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

customer ratings

(10)

Fuel Injector Replacement Estimate for Mercedes-Benz SLK300

Mercedes-Benz SLK300 Fuel Injector Replacement costs $937 on average.

CarServiceEstimateShop/Dealer Price
2009 Mercedes-Benz SLK300V6-3.0LService typeFuel Injector ReplacementEstimate$1683.22Shop/Dealer Price$2096.44 - $3223.81
2011 Mercedes-Benz SLK300V6-3.0LService typeFuel Injector ReplacementEstimate$1637.22Shop/Dealer Price$2050.51 - $3177.93
2010 Mercedes-Benz SLK300V6-3.0LService typeFuel Injector ReplacementEstimate$1637.22Shop/Dealer Price$2050.51 - $3177.92
Show example Mercedes-Benz SLK300 Fuel Injector Replacement prices

Fuel Injector Replacement Service

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0

Patrick

11 years of experience
159 reviews
Patrick
11 years of experience
Mercedes-Benz SLK300 V6-3.0L - Brake System Flush - Scottsdale, Arizona
Patrick figured out what was really wrong with the car versus the previous mechanic who misdiagosed....was without a car for 4 days and instead of the starter was the battery...which took less than an hour.

Jose

15 years of experience
249 reviews
Jose
15 years of experience
Mercedes-Benz SLK300 L4-2.0L Turbo - Pre-purchase Car Inspection - Tampa, Florida
Excellent Job, did a pre inspection for a used car moving around the dealerships. He was very professional, worked with the dealerships, and inspected the vehicle when it became available. Very pleased with his work.

Anthony

7 years of experience
117 reviews
Anthony
7 years of experience
Mercedes-Benz SLK300 V6-3.0L - Electric Problems - Elk Grove, California
ARRIVED ON TIME

Alex

22 years of experience
112 reviews
Alex
22 years of experience
Mercedes-Benz SLK300 V6-3.0L - Starter - Mesa, Arizona
Very good he takes pride in his work and loves the chalenge. Had the proper tools to handle the German car. Thank you for now . I will tell people in our park.

Excellent Rating

(10)

Rating Summary
9
1
0
0
0
9
1
0
0
0
Number of Mercedes-Benz SLK300 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Acura TL
The The 2012 Acura TL has softened features, great fuel economy, and an overall fresh feel compared to past model years. The interior has an elegant and sporty feel to it making it comfortable to ride in. Furthermore, it costs...
How to Repair Scratches on a Car
Fixing car paint scratches can be easier than you might think. Inspect the scratch, clean your car, and use a touch-up kit to fix scratched car paint.
P0027 OBD-II Trouble Code: Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1)
P0027 P0027 trouble code definition Exhaust Valve Control Solenoid Circuit Range/Performance (Bank 1) What the P0027 code means P0027 is the OBD-II generic code indicating the engine control module (ECM) has determined that the variable valve lift for the exhaust...

air conditioner not blowing well

This vehicle is equipped with a cabin air filter that filters the air coming into passenger compartment. The filter blocks debris, and in time restricts the air flow. It requires replacement at least once a year. Another possibly could be...

AC issue - 2008 Dodge Charger

Hi there. If the compressor is turning on and if the pressures are correct, then the lines need to be checked. If one of the lines going into the firewall are cold then the system may be working fine. If...

Hissing noise.

This may be a sign of a vacuum leak. High idle speed, stalling and hissing sounds are common signs of a vacuum leak. When a vacuum leak is present in an engine, this causes an excessive imbalance in the air/fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com