Mercedes-Benz SL500 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(99)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(99)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz SL500 Fuel Injector Replacement is $1469 with $1308 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$3028.61Shop/Dealer Price$3755.41 - $5829.45
1998 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$4330.66Shop/Dealer Price$5402.77 - $8552.01
2002 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$2974.61Shop/Dealer Price$3701.48 - $5775.59
1996 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$4330.66Shop/Dealer Price$5402.69 - $8551.88
1995 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$4329.80Shop/Dealer Price$5401.73 - $8550.36
2003 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$2786.72Shop/Dealer Price$3472.21 - $5457.68
1994 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$4338.30Shop/Dealer Price$5409.78 - $8558.07
1999 Mercedes-Benz SL500V8-5.0LService typeFuel Injector ReplacementEstimate$2988.11Shop/Dealer Price$3716.10 - $5791.04
Show example Mercedes-Benz SL500 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(99)

Rating Summary
92
7
0
0
0
92
7
0
0
0

Michael

16 years of experience
32 reviews
Michael
16 years of experience
SL500 2005 - Electric Problems - Hillcrest Heights, MD
Good

Michael

19 years of experience
168 reviews
Michael
19 years of experience
SL500 2002 - Spark Plugs - Fontana, CA
this guy is alright he did a very good job

Rafael

25 years of experience
65 reviews
Rafael
25 years of experience
SL500 1994 - Brake Pads - South San Francisco, CA
Great work

Raymond

35 years of experience
252 reviews
Raymond
35 years of experience
SL500 2001 - Fuel Filter - Las Vegas, NV
Outstanding!

Excellent Rating

(99)

Rating Summary
92
7
0
0
0
92
7
0
0
0
Number of Mercedes-Benz SL500 services completed
1089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Chevrolet Caprice PPV
With With the phasing out of the long-lived and beloved police cruiser in the form of the Ford Crown Victoria, 2012 brought a new car into town via the Caprice PPV (Police Patrol Vehicle). This new incarnation of an old...
How to Replace an Air Fuel Ratio Sensor
The air fuel ratio sensor fails within a vehicle if the check engine light comes on. Poor engine performance results from oxygen sensor failure.
P0825 OBD-II Trouble Code: Gear Lever Push-Pull Switch (Switch Anticipate)
P0825 means there is a circuit issue with the gear lever push-pull switch, likely due to a damaged switch or defective electrical components.

Blown engine

If you are saying the oil was never changed in 30k miles, then this would be the reason for the failure. A turbo engine needs normal oil changes (https://www.yourmechanic.com/article/when-should-i-change-my-oil) about every 3k to 5k miles. The turbo gets extremely hot...

Aux cigarette lighter

Radio repair and replacement services are available from YourMechanic. Please request service using YourMechanic's radio service page (https://www.yourmechanic.com/services/car-radio-is-not-working-inspection). Typically, cigarette lighter outlets can be used to power 12 volt devices and power inverters can also be plugged into the outlet...

Coolant low, check engine on, rough startup/idle, no heat.

Hi there. Thanks for contacting us today. In most cases, what you are describing is an indication of either an obstruction in the heater core or a coolant leak near the heater core. You should see some coolant leaking near...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com