Mercedes-Benz S600 Oxygen Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Oxygen Sensor Replacement Service

How much does a Oxygen Sensor Replacement cost?

On average, the cost for a Mercedes-Benz S600 Oxygen Sensor Replacement is $224 with $129 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Mercedes-Benz S600V12-5.8LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$496.25Shop/Dealer Price$609.07 - $908.14
2004 Mercedes-Benz S600V12-5.5L TurboService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$476.25Shop/Dealer Price$589.10 - $888.19
2015 Mercedes-Benz S600V12-6.0L TurboService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$352.17Shop/Dealer Price$434.00 - $640.03
1996 Mercedes-Benz S600V12-6.0LService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$390.57Shop/Dealer Price$481.96 - $716.76
1998 Mercedes-Benz S600V12-6.0LService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$408.55Shop/Dealer Price$504.50 - $752.84
2017 Mercedes-Benz S600V12-6.0L TurboService typeOxygen Sensor - Rear/Lower/Downstream ReplacementEstimate$352.17Shop/Dealer Price$426.48 - $626.88
2017 Mercedes-Benz S600V12-6.0L TurboService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$644.03Shop/Dealer Price$789.92 - $1205.36
2012 Mercedes-Benz S600V12-5.5L TurboService typeOxygen Sensor - Front/Upper/Upstream ReplacementEstimate$481.25Shop/Dealer Price$594.51 - $893.91
Show example Mercedes-Benz S600 Oxygen Sensor Replacement prices

What is the Oxygen Sensor all about?

With each new model year, manufacturers are adding more oxygen sensors to better manage engine operation. Some high performance engines have an oxygen sensor for each cylinder as well as one for the rear of each catalytic convertor. The sensors are located either underneath the hood or underneath the car. The oxygen sensors are connected (screwed) to the exhaust pipe, either in front or back of the catalytic converter. The front (upstream) sensors measure the amount of oxygen in the exhaust system. The purpose of the front oxygen sensor(s) is to measure how rich or lean the gases are as the gases exit the combustion chamber. Depending upon whether the exhaust gas is lean (high in oxygen content) or rich (low in oxygen content), the amount of fuel entering the engine is adjusted by the engine management computer to try and maintain an ideal mixture that produces the lowest emissions output from the catalytic convertor.

Rear (downstream) sensors are located behind the catalytic converter. The purpose of the rear oxygen sensor(s) is to monitor the oxygen content of the exhaust gases leaving the catalytic convertor.

If one or more of the oxygen sensors are faulty, your car may not pass the emissions test. If you drive your car with a faulty oxygen sensor, you may get poor gas mileage and it can damage the catalytic converter.

Oxygen Sensor-MATROX-1

When replacing the oxygen sensor remember:

  • Many oxygen sensors are damaged by leaking oil or coolant. If that is the case, the cause of that leak needs to be identified and repaired, or else the replacement oxygen sensor will be damaged as well.
  • New vehicles require specific oxygen sensors, and not the universal sensors that were common prior to 1996.

How it's done:

  • Scan the computer in the car for codes.
  • Inspect for vacuum leaks and holes in the exhaust system.
  • Remove and replace the oxygen sensor if it is bad.
  • Check electrical connections.
  • Check for proper operation of oxygen sensors.
  • Clear diagnostic codes.
  • Test drive car.

Our recommendation:

Keep up with the tune-ups. If check engine light is on, don't drive the car too long without getting it inspected. If check engine light is flashing, pull over and get the car towed to avoid costly repairs. Ask the mechanic to inspect the vacuum hoses and leaks in the exhaust system. If the vacuum hose or exhaust system is leaking, it will display an oxygen sensor fault code. Replacing an oxygen sensor may not fix the problem.

What common symptoms indicate you may need to replace the Oxygen Sensor?

  • Check Engine light is on.
  • Car is getting poor gas mileage.
  • Emission test fails.

How important is replacing the oxygen sensor?

Your vehicle has multiple oxygen sensors, and they all help the car run optimally. The front sensors measure how much oxygen is in the exhaust stream to measure how rich or lean the gases leaving the gas chamber are. The rear sensors measure the oxygen content of the gases as they leave the catalytic converter. The oxygen sensors then relay this information to your vehicle’s electronic control unit, so that it can adjust as necessary. Because cars depend on an ideal fuel-to-air ratio to function optimally, the oxygen sensors are leaned on for engine performance. When your oxygen sensors fail your car will run less smoothly, get worse mileage, and have worse emissions.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0

Mitchel

24 years of experience
239 reviews
Mitchel
24 years of experience
Mercedes-Benz S600 V12-5.5L Turbo - Starter - Miami, Florida
Showed up on time and did great work. Mitchel worked hard the entire time he was there with no time wasted. He got the old starter out and the new one in and my car fired up like a champ. He explained what he was doing thoroughly and answered every question I had.

Kwante

12 years of experience
45 reviews
Kwante
12 years of experience
Mercedes-Benz S600 V12-5.8L - Lubricate Hood Hinge - Baltimore, Maryland
Very professional service

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Mercedes-Benz S600 V12-5.5L Turbo - Oil/Fluid Leak - Peoria, Arizona
Shawn was absolutely awesome!!! A very delightful, knowledgeable honest person! He is my new mechanic!!! Will never go anywhere else again! I suggest anyone/everyone that is looking for a mechanic who will give u ur money's worth go to Shawn!!!!

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Mercedes-Benz S600 V12-5.5L Turbo - Car is not starting - Palo Alto, California
Robert is awesome. My only regret is that I made it this far in life without knowing that mobile mechanics as good as Robert exist. Great attitude, exceptionally high skill level, great work ethic.

Excellent Rating

(8)

Rating Summary
7
1
0
0
0
7
1
0
0
0
Number of Mercedes-Benz S600 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1000+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
Symptoms of a Bad or Failing Battery Temperature Sensor
Common signs include engine surging, low battery voltage, and an illuminated Battery Light.

Crank Shaft Sensor and Fuel Pump Issues.

Hello. A loose crankshaft sensor may be damaged if it falls off or catches on something. Aside from that, a loose crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) may also cause engine performance issues, including stalling, as it is one of the primary...

1992 Honda Accord cooling fans not operating properly.

Hi there. Your issue is the ECT (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) sensor B is not closing the loop when engaged. There is power to the sensor A from the computer, but the sensor B is not connecting when the vehicle is running hot...

oil pressure on 80 what can be the problem?

The best scenario is if the oil pressure sending unit is simply bad. The sending unit can be tested and/or you can simply tee in a known good gauge to rule the sending unit in or out as the cause....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com