Mercedes-Benz ML430 Brakes must be pumped to work Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(32)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(32)

Brakes must be pumped to work Inspection Service

How much does a Brakes must be pumped to work Inspection cost?

On average, the cost for a Mercedes-Benz ML430 Brakes must be pumped to work Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1999 Mercedes-Benz ML430V8-4.3LService typeBrakes must be pumped to work InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2000 Mercedes-Benz ML430V8-4.3LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2001 Mercedes-Benz ML430V8-4.3LService typeBrakes must be pumped to work InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz ML430 Brakes must be pumped to work Inspection prices

When you slow your car or decide to stop, you press the brake pedal. Most of the time, the pedal will be firm and you’ll be able to apply steady pressure until you reach the desired slower speed, or come to a complete stop. However, sometimes the pedal may “go to the floor” and you’ll have to pump it a couple of times to get the firm feel that you’re used to. If your brakes must be pumped to work, there’s a serious issue that needs to be addressed.

How this system works:

Your brakes work on fluid pressure. If the braking system isn’t able to build up the pressure necessary to operate the system, your pedal will feel strange. In some cases, it will be spongy and soft. In others, you’ll have to pump the brakes.

When you press the brake pedal, the master cylinder sends fluid into the lines, creating pressure. This activates the calipers, which squeeze the rotor on each wheel between the brake pads. Drum brakes work on a similar basis, but fluid pressure causes the actuator to press the shoes out against the sides of the drum to slow down the wheels.

Obviously, if there isn’t enough pressure in the lines, this doesn’t happen. However, if moisture has gotten into the system, the result can be similar. Water has a lower boiling point than brake fluid. When it’s heated at the brakes, it vaporizes, creating air in the lines (and allowing compression – brake fluid cannot be compressed).

Common reasons for this to happen:

  • Air in the Lines: The number one most common cause for having to pump your brakes to get them to work is air in the lines. This may be because your brakes were recently serviced but not bled correctly. It requires bleeding each wheel several times, starting with the wheels farthest from the master cylinder (passenger rear, driver rear, then passenger front and driver front). It can take multiple bleeds to remove all the air from the lines, even after a basic service. The fluid will then need to be topped off.

  • Low Brake Fluid: If your brake fluid is low (and it’s not due to brake pad wear), then the system will be unable to create enough pressure for normal operation and you may have to pump the pedal. Generally, low fluid is caused by a leak somewhere in the system, including at the caliper, the brake lines, or even the master cylinder.

  • Failing Master Cylinder: While rare, master cylinder failure does occur. If the master cylinder has begun leaking fluid down the back of the engine, you can expect to experience poor brake operation and reduced safety on the road.

  • Moisture in the Fluid: If your brake fluid has absorbed moisture (which is normal over time and through regularly wear and tear), you’ll notice reduced braking performance, including the possibility that you’ll have to pump the brake pedal in some situations.

  • Damaged or Missing Bleeder Valve: Each wheel should have a brake fluid bleeder valve on the line near the wheel hub. If one of yours has been damaged, it’s possible that you’re leaking fluid and allowing air into the line at the same time.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect your car’s brake system. The mechanic will visually inspect the master cylinder, the brake lines, calipers, and the rest of the system in order to determine the underlying cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the entire brake system, which may require the removal of one or more wheels. The mechanic will also need to check for air in the lines, as well as leaks in the lines and at the master cylinder.

How important is this service?

If your brakes have to be pumped to work, your system needs immediate service. This indicates a significant problem, including air in the lines. It reduces your stopping capability on the road, which endangers you, your passengers, as well as others on the road. One of our mechanics can diagnose and repair the problem, ensuring that you’re safe while driving.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0

Kyle

12 years of experience
137 reviews
Kyle
12 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt - Philadelphia, Pennsylvania
Great experience.

Richard

21 years of experience
461 reviews
Richard
21 years of experience
Mercedes-Benz ML430 V8-4.3L - Water Pump (Auxiliary) - Douglasville, Georgia
Richard was excellent and professional. Thanks for great service!

Ian

15 years of experience
133 reviews
Ian
15 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt - Seattle, Washington
Ian was great. He arrived on-time...actually, he called and said he could be there early if I was available, which was very nice. He not only fixed the broken belt, but took the effort to diagnose the cause of the problem. He was courteous and knowledgeable and I will request him the next time I need any work done on my car.

Christopher

16 years of experience
54 reviews
Christopher
16 years of experience
Mercedes-Benz ML430 V8-4.3L - Serpentine/Drive Belt - Houston, Texas
Good and efficent service with customer as priority

Excellent Rating

(32)

Rating Summary
32
0
0
0
0
32
0
0
0
0
Number of Mercedes-Benz ML430 services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

5 Essential Things to Know About the Towing Capacity of Your Car
If If you look around when you’re on the road, you’ll see many people towing things with their vehicles. While it may not be true for all of them, you can bet most of the drivers have figured their towing...
How Long Does a Shift Interlock Solenoid Last?
Modern Modern transmissions are much more advanced than they were only a few decades ago, particularly automatic transmission. There are many new features and designs on the market, ranging from ‘slick’ shifting transmissions to manual shift paddles on the steering...
What are the Car Pool Rules in Vermont?
Car Car pool lanes have been around for a few centuries, and have been rapidly growing in popularity. There are currently over 3,000 miles of car pool lanes in the United States, covering any different states. Millions of Americans rely...

How do I adjust the steering wheel of a 2012 Hyundai Elantra?

The steering wheel can be adjusted to fit your liking. Before driving, you should always adjust the steering wheel by following these steps: 1. Push down on the Lock Release knob until it locks into place. 2. Adjust the height,...

How to remove a clutch slave cylinder from a 1995 Volvo 850 none turbo

The slave cylinder on your car slides into a mounting sleeve. The two can pretty much fuse together over time making it very difficult to remove. To start with, you might find that removing the radiator fan will give you...

Should I put synthetic oil in my jeep commander

Hi there. This is a great article that talks about the benefits of swapping to synthetic oil (https://www.yourmechanic.com/article/can-you-switch-between-regular-and-synthetic-motor-oil). In regards to advice, today's synthetic oils and conventional oils are made much better than in years past. That being said, as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com