Mercedes-Benz GLC300 Automatic Shutdown Relay Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Automatic Shutdown Relay Replacement Service

How much does a Automatic Shutdown Relay Replacement cost?

On average, the cost for a Mercedes-Benz GLC300 Automatic Shutdown Relay Replacement is $114 with $19 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz GLC300L4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$153.15Shop/Dealer Price$172.69 - $208.81
2016 Mercedes-Benz GLC300L4-2.0L TurboService typeAutomatic Shutdown Relay ReplacementEstimate$133.15Shop/Dealer Price$160.22 - $201.99
Show example Mercedes-Benz GLC300 Automatic Shutdown Relay Replacement prices

What is the Automatic Shutdown Relay all about?

When you turn the key for your ignition to start, many different things happen. The fuel pump turns on, sending gas from the tank, through the lines, to the injectors. The battery sends voltage to the ignition system, which creates a spark, igniting fuel vapor and starting your engine. However, if the automatic shutdown relay (ASD) is not working, none of this will happen.

The automatic shutdown relay controls the power that is supplied to the ignition, the fuel pump, and the injectors, as well as other components. It is only activated for a few seconds during cranking, and is then turned off. Depending on the make and model in question, the automatic shutdown relay could be located under the hood, under the dash, or in another position.

As with any other electrical component, your automatic shutdown relay is subject to wear and tear, and frequent stopping and starting of the engine will exacerbate that wear. Eventually, it will fail and you’ll be left with a vehicle that doesn’t crank.

Keep in mind:

  • The ASD relay is not inspected during normal maintenance, and will only be checked during diagnostics for problems with the vehicle not cranking.
  • Many other problems can cause your engine not to crank, so professional diagnosis is necessary.
  • ASD failure is relatively rare, but it does happen.

How it's done:

  • The automatic shutdown relay is verified to see if it needs to be replaced
  • The defective automatic shutdown relay is removed
  • The new automatic shutdown relay is installed
  • The automatic shutdown relay is tested for operation
  • The vehicle is tested to ensure proper operation of the automatic shutdown relay

Our recommendation:

Your automatic shutdown relay provides power for some of the most important systems on your vehicle during ignition. If it fails, your engine will not crank, and it cannot be jumpstarted. If you are experiencing a no start condition, it may be the ASD relay, but it could be another problem. Seek immediate professional diagnosis and replacement by one of our expert mechanics.

What common symptoms indicate you may need to replace the Automatic Shutdown Relay?

  • Engine will not start
  • Check Engine light is on
  • Engine starts but stalls and dies

How important is this service?

Without an operational automatic shutdown relay, your engine will not start, which means your vehicle is not able to move. However, there are many other problems that can create the same symptom, ranging from a dead battery to a damaged battery, or a damaged cable to a failed main relay. If your automatic shutdown relay has failed, you will have to replace it before your vehicle will operate again.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0

Rusty

23 years of experience
528 reviews
Rusty
23 years of experience
Mercedes-Benz GLC300 L4-2.0L Turbo - Oil Change - Mansfield, Texas
On time and very polite.

Theodore

16 years of experience
1638 reviews
Theodore
16 years of experience
Mercedes-Benz GLC300 L4-2.0L Turbo - Oil Change - Bellevue, Washington
Efficient and spent time explaining a few extra things.

Collins

12 years of experience
532 reviews
Collins
12 years of experience
Mercedes-Benz GLC300 L4-2.0L Turbo - Brake Pads Replacement (Rear) - Atlanta, Georgia
Very knowledgeable and dependable

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz GLC300 L4-2.0L Turbo - Battery Voltage Converter - Carson, California
Absolutely one of if not, the best and most personable mechanics yet! Kenneth was tenacious about getting the needed part and his followup was supreme. Always on time and kept in contact on status of the part and his ETA. Meticulous when it came to putting enemy thing back as it should be as well. I will definitely call on him again! He is also a delight to chat with.

Excellent Rating

(13)

Rating Summary
13
0
0
0
0
13
0
0
0
0
Number of Mercedes-Benz GLC300 services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Ford Focus
The The 2012 Ford Focus brings a lot to the world of compact cars. Available as either a four-door sedan or a five-door hatchback, the Focus has great fuel efficiency and European styling that sets it apart from other cars...
Windshield Laws in Pennsylvania
Pennsylvania Pennsylvania has a variety of traffic laws that drivers are required to follow on the roadways. However, in addition to the road rules, motorists must also make sure their vehicles are in compliance with the following windshield laws when...
P3444 OB2-11 Trouble Code: Cylinder 6 Deactivation/Intake Valve Control Circuit High
What What the P3444 code means This code indicates that there is a problem with your intake valve on cylinder number 6. Your vehicle’s control module identifies that the measured values from the manifold absolute pressure (MAP) sensor, the throttle...

Car pulling when I change gears.

All the air that goes into the cars engine is metered. If there is unmetered air coming in somewhere it will be detected by the Oxygen sensors and a lean code will be set. A lean condition will cause a...

Dual zone control not working right

Each side has it’s own temperature blend door, and sun sensor. There is an in-car temp sensor on the drivers side. I wouldn’t be too worried about 10 degrees. The air flow might indicate a problem. The whole system is...

Knock sensor 2000 Chevrolet Lumina

Hi - first task is to recheck what codes are still present that represent a "knock sensor failure (https://www.yourmechanic.com/question/knock-sensor-1-by-dylan)". There may be an additional problem that has changed engine timing (worn timing chain for example) that is causing an engine...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com