Mercedes-Benz E250 Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Mercedes-Benz E250 Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2016 Mercedes-Benz E250L4-2.1L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Mercedes-Benz E250 Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Chris

18 years of experience
495 reviews
Chris
18 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Richmond, Texas
Chris was prompt and very professional. He was very knowledgeable. Finished with my Mercedes on time and the place he stayed and work was very clean, no mess.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Manvel, Texas
Daniel completed the service efficiently and quickly.

Ronald

41 years of experience
323 reviews
Ronald
41 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Battery - Spring, Texas
Ron was awesome! On time, knowledgeable, fast and friendly.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Check Engine Light is on - Houston, Texas
Knowledgeable and friendly. Definitely recommend.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz E250 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Change a Car Battery
Changing your car battery is a simple and easy automotive repair that you can actually accomplish yourself with the right preparation and...
10 Best Stores to Buy Auto Parts in Augusta, Georgia
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Augusta is Advance Auto Parts.
All About Car Warning Lights
Your car has a variety of warning lights to let you know when a specific feature is on, or if a part needs service or maintenance.

How to resolve the vvt sensor/camshaft position sensor circuit range. Having performance problem with my Toyota Vitz.

Hi there. Sounds like the variable valve timing sensor (VVT) is not functioning correctly. Check the wiring harness to the VVT and make sure that its connected. If the harness is good, then remove the harness and remove the VVT...

Vehicle won't start after I switched the ECM.

Hi there. First check the battery cables and make sure that they are clean and tight. Then check all of the sensors and make sure that all of them are connected. Then check the ECM and make sure that the...

I have a Ford Fusion 2008 recently my engine light has come on & it says i need a catalytic converter. Could this be why my car isn’t starting up right away?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com