Mercedes-Benz E250 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mercedes-Benz E250 Control Arm Assembly Replacement is $230 with $90 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$463.50Shop/Dealer Price$546.93 - $783.03
2016 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$872.07Shop/Dealer Price$1056.80 - $1603.77
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$1108.92Shop/Dealer Price$1253.17 - $1656.66
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$417.95Shop/Dealer Price$489.19 - $695.60
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$454.49Shop/Dealer Price$537.44 - $773.19
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$454.49Shop/Dealer Price$535.11 - $769.11
2015 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$422.15Shop/Dealer Price$494.47 - $704.05
2014 Mercedes-Benz E250L4-2.1L Turbo DieselService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$417.95Shop/Dealer Price$489.19 - $695.60
Show example Mercedes-Benz E250 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Ronald

42 years of experience
519 reviews
Ronald
42 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Battery - Spring, Texas
Ron was awesome! On time, knowledgeable, fast and friendly.

Chris

19 years of experience
600 reviews
Chris
19 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Richmond, Texas
Chris was prompt and very professional. He was very knowledgeable. Finished with my Mercedes on time and the place he stayed and work was very clean, no mess.

Daniel

22 years of experience
346 reviews
Daniel
22 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Oil Change - Manvel, Texas
Daniel completed the service efficiently and quickly.

Daniel

22 years of experience
346 reviews
Daniel
22 years of experience
Mercedes-Benz E250 L4-2.1L Turbo Diesel - Check Engine Light is on - Houston, Texas
Knowledgeable and friendly. Definitely recommend.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Mercedes-Benz E250 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P0744 OBD-II Trouble Code: Torque Converter Clutch Circuit Intermittent
P0744 code means there is an abnormality in the torque converter clutch circuit often due to transmission failure or internal blockages.
Windshield Laws in Iowa
If If you drive on the roads in Iowa, you have to be familiar with the traffic laws and follow them. In addition to those rules, you are also required to make sure that your windshield is in compliance with...
How Long Does a Transmission Filter Last?
Your Your transmission filter is a very important component in your vehicle, because it’s the front line of defense when it comes to keeping contaminants out of your transmission fluid. Most automobile manufacturers recommend a transmission filter change every 2...

How do I locate the steering fluid reserve in my hyundai creta sx

Hello. Hyundai is one of the vehicle manufactures that is utilizing the electric power steering (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) systems. This means your vehicle may not have a power steering pump, fluid reservoir, or hydraulic assisted steering. They are doing it with gear...

the sliding door lock in frozen in the locked position is this an indicator that the actuator needs replaced?

There is a motor in the lock actuator. Premature wearout of the motor is a known reported issue. The testing consists of ensuring that power is being delivered to the actuator, that is ensuring that the electrical connections to the...

I have W221 S65 we change the ECM and dit programing in it.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com