Mercedes-Benz CL600 Brake Wheel Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Brake Wheel Cylinder Replacement Service

How much does a Brake Wheel Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz CL600 Brake Wheel Cylinder Replacement is $248 with $115 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$390.43Shop/Dealer Price$472.29 - $662.75
2003 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
2012 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
2013 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$362.43Shop/Dealer Price$444.27 - $634.72
1999 Mercedes-Benz CL600V12-6.0LService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$362.43Shop/Dealer Price$444.37 - $634.89
2005 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Passenger Side ReplacementEstimate$362.43Shop/Dealer Price$444.33 - $634.82
2006 Mercedes-Benz CL600V12-5.5L TurboService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$369.43Shop/Dealer Price$451.00 - $641.23
2001 Mercedes-Benz CL600V12-5.8LService typeBrake Wheel Cylinder - Driver Side ReplacementEstimate$369.43Shop/Dealer Price$451.91 - $642.83
Show example Mercedes-Benz CL600 Brake Wheel Cylinder Replacement prices

What is the Brake Wheel Cylinder all about?

Brake wheel cylinders push the brake shoes against the brake drum, causing friction that slows down the car. They are located in the rear brake system, inside the brake drums. Over time, wheel cylinder seals may wear out and start leaking brake fluid, reducing the effectiveness of the brakes.

Keep in mind:

Brake wheel cylinders are replaced in pairs. Both rear tires will get new cylinders.

How it's done:

  • Inspect rear wheel cylinders for leakage.
  • Inspect rear brake shoes and hardware.
  • Replace wheel cylinders if found faulty.
  • Adjust rear brakes.
  • Lube backing plate.
  • Make sure axle seals are not leaking into brake drums.
  • Bleed entire brake system.
  • Perform a brake inspection, including test drive.

Our recommendation:

It is a good idea to get the brake wheel cylinders inspected once every year. You should get your brake system inspected immediately if the brake warning light is on.

What common symptoms indicate you may need to replace the Brake Wheel Cylinder?

  • Brake pedal goes all the way to the floor.
  • Noise from rear brakes.
  • Fluid leaking underneath the car near rear tires.

How important is this service?

When you depress your brake pedal, the brake wheel cylinder applies pressure to the brake shoe. This pressure pushes the brake shoe into contact with the brake drum, which creates the friction that allows your vehicle to slow down and stop. When the brake wheel cylinder stops working, it is no longer able to exert enough force onto the brake shoe, and your vehicle will not be able to brake as effectively as it should.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1

Patrick

33 years of experience
1422 reviews
Patrick
33 years of experience
Mercedes-Benz CL600 V12-5.8L - Crankshaft Position Sensor - Austin, Texas
Good guy. Arrived 5 minutes early (6:55 A.M.). Got the job done quickly. Excellent knowledge and experience.

Christian

12 years of experience
40 reviews
Christian
12 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Water Pump - Valley Village, California
great mecanic. very helpful.

Grzegorz

41 years of experience
473 reviews
Grzegorz
41 years of experience
Mercedes-Benz CL600 V12-5.8L - Water Pump - San Francisco, California
Knows what he is doing, gotta watch the oily hands in the car...

Kenneth

20 years of experience
785 reviews
Kenneth
20 years of experience
Mercedes-Benz CL600 V12-5.5L Turbo - Brake Pads Replacement (Front) - Los Angeles, California
Very knowledgeable and deligent with his work. He is prompt and always on time.

Excellent Rating

(6)

Rating Summary
4
1
0
0
1
4
1
0
0
1
Number of Mercedes-Benz CL600 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Steering Gear Adjuster Plug Last?
It’s It’s very important that you have the right amount of control for handling your vehicle. The steering wheel’s movement should be precise and smooth. Of course, as your steering components age, the precision that marked it originally will fade....
P0373 OBD-II Trouble Code: Timing Reference High Resolution Signal A Intermittent/Erratic Pulses
What What the P0373 code means A P0373 means that your powertrain control module (PCM) has detected an irregularity in the high resolution timing reference signal. The “A” refers the area of the system circuitry than to a particular component...
How Does Car Steering Work?
A steering wheel is linked to the front wheels of a vehicle, and varies according to the type of steering the car has.

Windshield wiper stopped moving

It could be that the linkage rod popped off, but you would hear all kinds of noise coming from under the cowl. I would check the nut that attaches the wiper arm to the hub. It might have a plastic...

My steering wheel vibrates

The vibration or bumping you are getting is due to one or more items that are binding. The upper strut bearing, lower ball joint or the tie rod end is binding from wear or lack of lubrication. A proper inspection...

My car start and run fine but when i put in drive it shuts off

Hello there, thank you for asking about your 2001 Saab 9-5. I would recommend checking the idle air control valve. If you would like help, an expert from YourMechanic can come to your home or office to diagnose your car's...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com