Mercedes-Benz C350e Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,716)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,716)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mercedes-Benz C350e Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2017 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2016 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Mercedes-Benz C350eL4-2.0L Turbo HybridService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Mercedes-Benz C350e Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121

Miguel

21 years of experience
251 reviews
Miguel
21 years of experience
Mercedes-Benz C350e L4-2.0L Turbo Hybrid - Oil Change - Edgewater, New Jersey
Very professional! He answered all questions! He was also very polite

Juan

12 years of experience
55 reviews
Juan
12 years of experience
Mercedes-Benz CLK320 V6-3.2L - Oil level is low - Vallejo, California
Super Professional

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Oil Change - Davis, California
Jeff changed my oil pretty quickly even though my Mercedes is a bit of a hassle to deal with. Additionally, he helped me figure out that the reason my car wasn't changing gears is most likely because it does not have enough transmission fluid. On top of that, he was very friendly and provided me with awesome customer service- and now I know exactly what I need to get services to get my car back in action!

Ronnie

30 years of experience
123 reviews
Ronnie
30 years of experience
Mercedes-Benz C300 V6-3.0L - Engine hesitates during acceleration - Nashville, Tennessee
Very thorough, knowledgeable, and flexibility

Excellent Rating

(5,716)

Rating Summary
5,320
192
54
29
121
5,320
192
54
29
121
Number of Mercedes-Benz services completed
62876+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Why Are My Tires Wearing Out Faster Than Normal?
If If you noticed that one or more of your tires are exhibiting signs of abnormal wear or is wearing out at a suspiciously fast rate, it may be a sign that there are other problems with your vehicle. Your...
The Top 5 Selling Cars in California in 2012
California California natives are notably environmentally conscious, and this often shows in their choices of vehicles as well. While trucks rarely make it to the top spots, hybrid vehicles are frequently on the list. Though previous years have seen the...
P0083 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 2)
P0083 P0083 code definition P0083 is a general OBD2 code indicating a issue with bank 2 intake valve control solenoid. This code may be seen with P0081 and P0082. The vehicle also has a bank 1 valve control solenoid. What...

why does my battery keep going dead?

The best way to diagnose the type of issue your Hyundai is having is by beginning with using professional level test equipment to verify that the battery, charging system, and starter are all functioning correctly. These testers are widely used...

When a car doesn't want to shift, what sensor is it for on a Cadillac SRX 2005?

Hi there. There are three different types of sensors and solenoids that will cause a transmission to not shift. 1. --- Transmission Position Sensor (https://www.yourmechanic.com/services/transmission-position-sensor-switch-replacement) 2. --- Vehicle Speed Sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) 3. --- Shift Solenoids (https://www.yourmechanic.com/services/car-does-not-shift-from-park-to-drive-inspection) All three types of...

I ask a questiion earlier and was very pleased with response from Tim. After reading his answer i was browsing some of the other q

Hi Chris. I've always believed that engineers that design cars, trucks and SUV's driving on the roads today are pretty smart folks, and contrary to what some might say, there is always a method to their madness. In the case...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com