Mercedes-Benz 600SEL Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Mercedes-Benz 600SEL Car is not getting enough power Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mercedes-Benz 600SELV12-6.0LService typeCar is not getting enough power InspectionEstimate$124.99Shop/Dealer Price$139.69 - $150.72
1993 Mercedes-Benz 600SELV12-6.0LService typeCar is not getting enough power InspectionEstimate$104.99Shop/Dealer Price$119.72 - $130.77
Show example Mercedes-Benz 600SEL Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz E350 V6-3.5L - Car is not getting enough power - Los Angeles, California
Kenneth was great! He arrived on time, listened to my description of the problem with the car; explained what he was doing as he used his diagnostics tools on my car, and went with me on a test drive to further investigate the problem. I will use him again and would happy to refer him to my friends and family.

Ralph

38 years of experience
187 reviews
Ralph
38 years of experience
Mercedes-Benz C250 L4-1.8L Turbo - Car is not getting enough power - Kent, Washington
Ralph was very knowledgeable and confident in his work. He was nice and professional. Ralph took the time to listen to both me and my vehicle. He didn't try to sell me a bunch of things I didn't need. I will be using Ralph again for mu future car needs.

Dave

23 years of experience
303 reviews
Dave
23 years of experience
Mercedes-Benz 300SE L6-3.0L - Car is not getting enough power - San Jose, California
Dave has integrity which I highly value.

Whitney

39 years of experience
783 reviews
Whitney
39 years of experience
Mercedes-Benz ML430 V8-4.3L - Pre-purchase Car Inspection - San Jose, California

Excellent Rating

(4)

Rating Summary
3
0
0
0
1
3
0
0
0
1
Number of Mercedes-Benz Car is not getting enough power Inspection services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 GMC Canyon
In In today’s world where it seems as if carmakers are determined to deliver only the largest vehicles possible, the 2012 GMC Canyon offers a compact pickup that holds its own. From a 4-cylinder that offers more horsepower than other...
A Buyer’s Guide to the 2012 Hyundai Veracruz
The The sleek design, luxurious interior and smooth finish of the 2012 Hyundai Veracruz belies a full size SUV from a much higher price range. When you add expert handling and acceptable performance, you have a vehicle that is well-worth...
A Buyer’s Guide to the 2012 Mitsubishi Galant
If If you’re in the market for a midsize sedan and want the best price possible, you may be thinking about visiting a Honda or Toyota dealership. Before you do, check out the 2012 Mitsubishi Galant. Key Features Considering how...

Problems with gear shifting and transmission

It is possible that you could have a worn out transmission mount (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-engine-mount). The transmission mount is what connects the transmission to the body of the vehicle. The transmission will normally have some movement when it is shifting. The mount...

Trouble Starting, and sometimes doesn't start at all - Dies at idle from time to time.

Hello. Cleaning the throttle body and idle valve may have been needed, but the intermittent starting and dying symptom can be the camshaft (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) and crankshaft sensors (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). These are the codes P0335 (https://www.yourmechanic.com/article/p0335-obd-ii-trouble-code-crankshaft-position-sensor-a-circuit-malfunction-by-spencer-clayton) and P0340 (https://www.yourmechanic.com/article/p0340-obd-ii-trouble-code-camshaft-position-sensor-circuit-malfunction-by-jamahl-walker). The code P0446...

No parking light bulbs, the good fuses blew. Removed all of the parking bulbs and replaced the fuses. The fuse didn't blow till a bulb is plugged in.

Hello. You likely have a short somewhere in the circuit. This may be related to other light circuits, a terminal or connection, or by a damaged wire. You can start by performing a visual inspection. A rule of thumb is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com