Mercedes-Benz 350SD CV Axle / Shaft Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

CV Axle / Shaft Assembly Replacement Service

How much does a CV Axle / Shaft Assembly Replacement cost?

On average, the cost for a Mercedes-Benz 350SD CV Axle / Shaft Assembly Replacement is $469 with $217 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercedes-Benz 350SDL6-3.4L Turbo DieselService typeAxle / CV Shaft Assembly - Driver Side Front ReplacementEstimate$785.52Shop/Dealer Price$923.49 - $1311.89
1991 Mercedes-Benz 350SDL6-3.4L Turbo DieselService typeAxle / CV Shaft Assembly - Passenger Side Rear ReplacementEstimate$768.46Shop/Dealer Price$890.67 - $1242.13
1991 Mercedes-Benz 350SDL6-3.4L Turbo DieselService typeAxle / CV Shaft Assembly - Driver Side Rear ReplacementEstimate$740.56Shop/Dealer Price$855.89 - $1186.50
1991 Mercedes-Benz 350SDL6-3.4L Turbo DieselService typeAxle / CV Shaft Assembly - Passenger Side Front ReplacementEstimate$914.64Shop/Dealer Price$1083.46 - $1576.74
Show example Mercedes-Benz 350SD CV Axle / Shaft Assembly Replacement prices

What are CV Axles and how do they work?

All front wheel drive and all wheel drive cars use CV axles. “CV” is short for constant velocity. You have your engine and transmission in the car. Which are mounted to the body of the car and cannot move up and down with the suspension. [AB2] Then you have the suspension and wheels on the car, which can go up and down to absorb bumps and on the front of the car, steer. The CV axle is a shaft that has two constant velocity joints at either end of it. One end comes out of the transmission, the other end mounts in the wheel hub. The two joints let the axle continue to spin as the suspension travels up and down and you steer the car. An fwd car will have one for both the passenger side and driver’s side. An AWD car will have the same, but additionally two in the rear of the car. Each of the CV joints is covered by a rubber accordion looking boot that holds the grease in and keeps dirt and water out. Because of mileage, environment, and just wear and tear these boots can rip. When they rip, grease escapes, dirt, and water get into the CV joint and can make it wear out. This will often cause a clicking noise from the front of the car while turning.

When to replace your CV axles.

There is no set interval for changing CV axles. They simply wear out over time and unless you have your car regularly inspected by a mechanic you may not know that they have torn boots.

  • You hear a clicking sound when turning while driving from the front of the vehicle
  • You notice lots of heavy black axle grease inside of your wheel or on the ground around your car.
  • Vibration at highway speeds.

How mechanics replace CV axles.

The mechanic will:

  • Verify the axle shaft needs to be replaced.
  • Remove wheel and replace the faulty axle.
  • Torque all fasteners and wheels to factory specifications.
  • Top off any lost transmission fluid
  • Check tire pressure.
  • Perform a road test.

Is it safe to drive with a worn out CV axle?

For a very short period, yes you can. However, over time, you run the risk of having the CV break and leaving you stranded. The CV axle is the only thing that transmits power from your engine and transmission to the wheels. It’s vital to keep you on the road.

When replacing cv axles keep in mind:

  • Your car has multiple axle shafts, but in most cases, only one will need to be replaced.
  • Even if the CV joints or boots are the only parts of the axle to fail, it is often recommended to replace the entire axle.
  • CV axles in climates that have snow and use road salt can seize to the vehicle’s wheel bearing hub. It may require extra parts or labor to replace the CV axle.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(16)

Rating Summary
15
0
0
0
1
15
0
0
0
1

Dellano

19 years of experience
554 reviews
Dellano
19 years of experience
Mercedes-Benz GL450 V8-4.6L - Axle / CV Shaft Assembly Replacement (Passenger Side Rear) - Potomac, Maryland
Dellano is great at what he do. Smart and experienced.

Justin

5 years of experience
31 reviews
Justin
5 years of experience
Mercedes-Benz C320 V6-3.2L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Philadelphia, Pennsylvania
Great job, very pleased

Jonathan

14 years of experience
171 reviews
Jonathan
14 years of experience
Mercedes-Benz C300 V6-3.0L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Putnam, Connecticut
He was on time, explained the job as he did it, professional, and had a good attitude.

Mazyar

20 years of experience
587 reviews
Mazyar
20 years of experience
Mercedes-Benz E350 V6-3.5L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - Covington, Georgia
It was the most wonderful experience. Will use be using Mark for all of my vehicles.

Excellent Rating

(16)

Rating Summary
15
0
0
0
1
15
0
0
0
1
Number of Mercedes-Benz CV Axle / Shaft Assembly Replacement services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

The Most Common Error Codes for Transmission Problems
If your Check Engine Light has come on, there are a number of conditions that could be causing it. Many are related...
P0538 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit High
P0538 means that voltage readings from the A/C evaporator temperature sensor that are irregular due to a faulty temperature sensor or wiring.
How to Buy Good Quality Windshield Shades for Parking
Sunlight Sunlight can be incredibly damaging to the interior of your car. UV light can dry out the material of your dashboard over time, leading to cracking and wear. Of course, sunlight also means heat, and the interior of your...

What does it mean if the Malfunction Indicator Lamp comes on?

The Check Engine light is actually called a Malfunction Indicator Lamp. It’s designed to come on when there’s a problem with any component in your emissions system. That covers a wide range of sensors and other equipment on your engine,...

How do you operate the fog lights?

If your car is equipped with fog lights, they can provide better illumination of the road when you drive in misty or foggy conditions. Here’s what you need to know about operating them: Turn the ignition on. Turn the headlight...

I have a 1996 toyota tercel running & idling really rough. Trouble codes are: P0301, P0302, P0304, P0401 & P0402. Help please!?

Hi There, Codes P0301, P0302, P0304 relates to misfires in cylinders 1, 2, and 4. Codes P0401 and P0402 relate to the EGR valve (https://www.yourmechanic.com/services/exhaust-gas-recirculation-egr-valve-replacement) not functioning properly. The EGR valve is likely detecting that there is either a condition...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com