Mercedes-Benz 300TE Clutch Slave Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18)

Clutch Slave Cylinder Replacement Service

How much does a Clutch Slave Cylinder Replacement cost?

On average, the cost for a Mercedes-Benz 300TE Clutch Slave Cylinder Replacement is $334 with $152 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Mercedes-Benz 300TEL6-3.0LService typeClutch Slave Cylinder ReplacementEstimate$578.28Shop/Dealer Price$680.67 - $969.39
1990 Mercedes-Benz 300TEL6-3.0LService typeClutch Slave Cylinder ReplacementEstimate$566.57Shop/Dealer Price$664.93 - $950.65
1993 Mercedes-Benz 300TEL6-3.0LService typeClutch Slave Cylinder ReplacementEstimate$566.57Shop/Dealer Price$664.99 - $950.75
1992 Mercedes-Benz 300TEL6-3.0LService typeClutch Slave Cylinder ReplacementEstimate$566.57Shop/Dealer Price$664.99 - $950.74
Show example Mercedes-Benz 300TE Clutch Slave Cylinder Replacement prices

What is the Clutch Slave Cylinder all about?

A clutch master cylinder contains a reservoir that stores the brake fluid. It is connected to the clutch slave cylinder through hoses. When you push the clutch pedal, brake fluid flows from the clutch master cylinder to the slave cylinder, applying the pressure necessary to move (engage) the clutch. It has internal and external seals that can fail. If the external seals wear out, the clutch master cylinder will leak brake fluid, reducing the amount of fluid in the car and causing the clutch to malfunction. You may also find leaked brake fluid down by the clutch pedal (inside the car). If the internal seals wear out, the clutch fluid will continue to circulate inside instead of being directed to the slave cylinder. In that case, the clutch pedal will go all the way to the floor when you apply the clutch.

Keep in mind:

Whenever the clutch master cylinder is replaced, it is recommended to replace the slave cylinder (connected to the master cylinder through the hose). When the master cylinder goes bad, it is extremely common for the slave cylinder to follow suit. Note some clutch slave cylinders are installed inside the transmission. To replace this type of slave cylinder the transmission has to be removed.

How it's done:

  • Inspect clutch master cylinder and slave cylinder.
  • Check the condition of brake fluid.
  • Inspect the operation of clutch pedal.
  • Remove and replace clutch master cylinder and slave cylinder.
  • Bleed all air from the master cylinder.
  • Test drive the vehicle.

Our recommendation:

Usually during an oil change, mechanics check the amount of brake fluid. If you feel a change in the way the clutch pedal feels (softer pedals) when stepping on it, you should have a mechanic inspect the clutch master cylinder and hose. Clutch fluid should be changed every 24,000 miles.

What common symptoms indicate you may need to replace the Clutch Slave Cylinder?

  • Clutch pedals goes all the way to the floor.
  • Brake fluid leaking around the clutch pedal.
  • Not able to change gears.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1

David

37 years of experience
195 reviews
David
37 years of experience
Mercedes-Benz 300TE L6-3.0L - neutral safety switch - Long Beach, California
Amazing service. Very friendly and knowledgeable

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Mercedes-Benz 300TE L6-3.0L - Car AC Repair - Pittsburg, California
Joshua was awesome! Super friendly and knowledgeable. Would definitely use his services again!

Nathan

22 years of experience
298 reviews
Nathan
22 years of experience
Mercedes-Benz 300TE L6-3.2L - Power Seat Switch Replacement (Passenger Side Front) - Austin, Texas
Great

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Mercedes-Benz 300TE L6-3.0L - Car is hard to start - Nashville, Tennessee
Joe is now on speed dial:)

Excellent Rating

(18)

Rating Summary
17
0
0
0
1
17
0
0
0
1
Number of Mercedes-Benz 300TE services completed
198+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Door Lock Relay
If the power door locks function intermittently or do not work at all, you may need to replace the door lock relay.
P0233 OBD-II Trouble Code: Fuel Pump Secondary Circuit Intermittent
P0233 P0233 code definition Fuel pump Secondary Circuit Intermittent What the P0233 code means P0233 is a generic OBD-II code that is triggered when the engine control module (ECM) detects that the secondary circuit to the fuel pump has an...
How to Register a Car in Massachusetts
If If you are planning a move to the great state of Massachusetts, then you will need to make sure that you have all of your bases covered. Among the most important things that you will have to do when...

How do I turn off the flash lamps?

Flash lamps are a locking and unlocking feature. When you lock or unlock your vehicle with the remote keyless entry (RKE) transmitter, your turn signals flash on and off. This acts as visual confirmation, and can also help you see...

Symtom is late or advanced gear shifting resulting to sudden stop of the car, cvt problem...? 2010 Subaru Forrester

Hello - yes, this is possibly a programming issue with your CVT (https://www.yourmechanic.com/question/why-is-the-cvt-transmission-whining-noise-so-loud-when-driving-by-ronald-h) transmission. While Subaru CVT transmissions don't fail outright all that often, there seems to be a wide range of operating smoothness, which depends on the transmission controller...

White smoke coming out from exhaust when throttled.

Hello, thank you for writing in. The lowering of the engine oil is a sign that the oil is being burned in the engine. For the oil to get into the combustion chamber it must pass through a bad piston...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com