Mazda Millenia Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(65)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(65)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Mazda Millenia Intake Manifold Gaskets Replacement is $512 with $92 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mazda MilleniaV6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$777.40Shop/Dealer Price$866.30 - $1108.70
1999 Mazda MilleniaV6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$750.37Shop/Dealer Price$833.97 - $1072.40
1996 Mazda MilleniaV6-2.3L TurboService typeIntake Manifold Gaskets ReplacementEstimate$855.05Shop/Dealer Price$909.48 - $1053.52
1995 Mazda MilleniaV6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$750.37Shop/Dealer Price$834.04 - $1072.52
2001 Mazda MilleniaV6-2.3L TurboService typeIntake Manifold Gaskets ReplacementEstimate$855.05Shop/Dealer Price$916.25 - $1065.37
2001 Mazda MilleniaV6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$750.37Shop/Dealer Price$834.47 - $1073.26
1999 Mazda MilleniaV6-2.3L TurboService typeIntake Manifold Gaskets ReplacementEstimate$855.05Shop/Dealer Price$909.55 - $1053.64
1998 Mazda MilleniaV6-2.5LService typeIntake Manifold Gaskets ReplacementEstimate$750.37Shop/Dealer Price$834.04 - $1072.52
Show example Mazda Millenia Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(65)

Rating Summary
61
2
0
0
2
61
2
0
0
2

Kelly

35 years of experience
173 reviews
Kelly
35 years of experience
Mazda Millenia V6-2.5L - Spark Plugs - Charlotte, North Carolina
Great guy comes on time or even early have had him twice and have no complaints he really does his job and communicate very well

Travis

14 years of experience
691 reviews
Travis
14 years of experience
Mazda Millenia V6-2.5L - Radiator - Minneapolis, Minnesota
He was great and very nice I like his service and I world recommend him thank you travis

Mario

8 years of experience
135 reviews
Mario
8 years of experience
Mazda Millenia V6-2.5L - Oil/Fluid Leak - Richmond, Virginia
He was professional and impredded me he knows his job. He explaioned what was wrong professionally.

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Mazda Millenia V6-2.5L - Idler Pulley - Tampa, Florida
Joe was on time and very personable. He completed the job on time and I was very pleased with his work. I would use him again.

Excellent Rating

(65)

Rating Summary
61
2
0
0
2
61
2
0
0
2
Number of Mazda Millenia services completed
715+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

P0166 OBD-II Trouble Code: O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3)
P0166 P0166 Code Definition O2 Sensor Circuit No Activity Detected (Bank 2, Sensor 3) What the P0166 code means The P0166 code means that the third oxygen sensor on the second bank of the exhaust has failed or is not...
How to Register Your Car
Vehicle registration is an important part of owning and buying a car. The process to register your car varies by state but luckily it's an easy task.
10 Best Stores to Buy Auto Parts in San Francisco, California
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in San Francisco is O’Reilly Auto Parts.

Battery not keeping charge

First, the battery and charging system would need to be checked again. The battery wiring from the battery needs to be checked all the way to, and from, the battery, starter, alternator, and fuse panel to look for corroded splices...

Car will not turnover. Just one click when the key is turned. All electronics (radio, lights, etc.) are working.

Hi There, Generally, when turning the key produces one single click sound, this often times indicates you may have a faulty starter solenoid (https://www.yourmechanic.com/services/starter-replacement). A faulty starter solenoid will generally produce a clicking sound when turning the key. The starter...

My transmission is slipping. If I replaced it while that solve my problem?

If the transmission is actually slipping, a replacement with a good unit should do the trick. But transmission problems can be complicated, especially with the current electronically controlled units, and diagnosis should be done by someone with experience in that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com