logo

Mazda 626 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(142)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(142)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Mazda 626 Control Arm Assembly Replacement is $270 with $130 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Mazda 626L4-2.0LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$887.30Shop/Dealer Price$1049.37 - $1521.81
1993 Mazda 626L4-2.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$696.90Shop/Dealer Price$812.20 - $1151.08
1994 Mazda 626V6-2.5LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$696.90Shop/Dealer Price$812.24 - $1151.15
1995 Mazda 626L4-2.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$696.90Shop/Dealer Price$812.24 - $1151.15
1993 Mazda 626V6-2.5LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$696.90Shop/Dealer Price$814.75 - $1155.53
1998 Mazda 626V6-2.5LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$802.30Shop/Dealer Price$944.23 - $1362.37
2001 Mazda 626V6-2.5LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$871.98Shop/Dealer Price$1031.12 - $1501.36
1995 Mazda 626V6-2.5LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$405.73Shop/Dealer Price$472.52 - $668.72
Show example Mazda 626 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mazda 626 services completed
1562+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(142)
Rating Summary
129
10
2
0
1
129
10
2
0
1

Luis

5 years of experience
302 reviews
Request Luis
Luis
5 years of experience
Request Luis
by RayQuan
Mazda 626 L4-2.0L - Control Arm Assembly Replacement (Front Lower Right) - Richmond, Virginia
Did a great job, would recommend

Dan

40 years of experience
1080 reviews
Request Dan
Dan
40 years of experience
Request Dan
by Jordan
Mazda 626 V6-2.5L - Valve Cover Gasket - Lawrenceville, Georgia
God of mechanics

Brandon

19 years of experience
318 reviews
Request Brandon
Brandon
19 years of experience
Request Brandon
by Braska
Mazda 626 L4-2.0L - Distributor Rotor and Cap - Raleigh, North Carolina
Great job! very knowledgable, and he took the time to explain what he was doing and why.

Gustavo

18 years of experience
575 reviews
Request Gustavo
Gustavo
18 years of experience
Request Gustavo
by Lisa
Mazda 626 L4-2.0L - Car is overheating - San Marcos, Texas
Great service from Gustavo

Excellent Rating

(142)
Rating Summary
129
10
2
0
1
129
10
2
0
1
Number of Mazda 626 services completed
1562+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

Rules of the Road For Nevada Drivers
If If you’re a licensed driver, then you know the traffic laws in your state well. Many of those laws are based on common sense and remains the same throughout each state. However, other states may have different rules that...
Read more
A Buyer's Guide to the 2012 Honda Crosstour
There There could be a number of reasons an SUV isn’t right for you: the price, the size, their mpg, etc. However, there could also be a number of reasons you’d really like to have some extra space. If that’s...
Read more
How to Register a Car in New Hampshire
One One of the best places to move to is New Hampshire due to its natural beauty and the great residents that inhabit this state. If you are making a move to New Hampshire, you will have to make sure...
Read more

Tire has slow leak

Hello. If your tire has a slow leak, this is likely due to a small hole being in it. It is very common for people to drive over a nail, screw, or road debris. When the object is stuck in...
Read more

Alarm goes off when inserting key into ignition

Hello. Even though the battery has been tested, there still may be a problem with the battery or alternator (https://www.yourmechanic.com/article/alternator-or-car-battery-how-to-tell-which-part-is-the-problem) not charging properly if the car needs to be jump started. The factory alarm is very hard to disable and...
Read more

Only get heat when i rev up my car or push the gas. Other tham that i only get cold air coming out.

You may have a clogged heater core that may be prohibiting the outer linings of the heater core to get hot. As you know, the heater core is a series of tubes that the coolant runs through that generates the...
Read more
  1. Home
  2. Estimates
  3. Mazda
  4. 626
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE