Mazda 323 Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mazda 323 Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Mazda 323L4-1.6LService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 Mazda 323L4-1.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Mazda 323L4-1.6LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1988 Mazda 323L4-1.6L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1993 Mazda 323L4-1.8LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1991 Mazda 323L4-1.8LService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Mazda 323L4-1.6LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1995 Mazda 323L4-1.8LService typeOil level is low InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mazda 323 Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0

Steve

37 years of experience
149 reviews
Steve
37 years of experience
Mazda 323 L4-1.6L - Oil Change - Hayward, California
My car is old and easy to work on. Steve got the oil changed in minutes. Very convenient for any mechanic. I liked this service for the price to my personal wallet.

Bryce

16 years of experience
26 reviews
Bryce
16 years of experience
Mazda 323 L4-1.6L - Car will not move when in gear. Won't go forward or in reverse. Please advise. - Fort Worth, Texas

Jose

16 years of experience
324 reviews
Jose
16 years of experience
Mazda 323 L4-1.6L - Radiator - Hollywood, Florida
he did excellent work

Kevin

33 years of experience
234 reviews
Kevin
33 years of experience
Mazda 323 L4-1.6L - Car is not starting - Huntington Park, California
Amazing! Found the problem quickly and explained why it wasn't functioning properly. Totally transparent and super friendly. I would definitely recommend and call again.

Excellent Rating

(6)

Rating Summary
5
1
0
0
0
5
1
0
0
0
Number of Mazda 323 services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in South Dakota
All All drivers in South Dakota are required to prove financial responsibility in order to legally operate and register a vehicle. The most common way that drivers do this is to purchase an insurance policy; however, drivers may also deposit...
P2229 OBD-II Trouble Code: Barometric Pressure Circuit High
P2229 P2229 code definition Barometric pressure circuit high What the P2229 code means This trouble code indicates that the powertrain control module has detected a pressure that exceeds the manufacturer’s threshold of acceptance in the barometric pressure circuit. What are...
How to Shift From First to Second Gear in a Manual Transmission Car
Shifting from first to second gear in a manual transmission requires accuracy and practice, as well as a feel for the car.

P0843

Trouble code P0843 (https://www.yourmechanic.com/article/p0843-obd-ii-trouble-code-transmission-fluid-pressure-sensor-a-circuit-high-by-logan-utsman) pops up quite frequently on vehicles such as your Honda CR-V. The 2nd clutch transmission pressure switch is installed in the hydraulic pressure circuit to the 2nd clutch. The Powertrain Control Module (PCM) uses this information...

My car would not turn over and made a loud noise when trying to start it

This depends on what the loud noise was. If a starter was not working, then you would hear either a simultaneous clicking sound for a low battery or a one time click for the starter solenoid sticking. If you heard...

Humming/vacuum sound from engine

Based on your description, it sounds like you might have a vacuum leak. I would recommend looking around under your hood to see if any hoses are flat, torn, or have holes in them. This will create a vacuum leak...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com