Lexus RX330 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(325)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(325)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Lexus RX330 Front Crankshaft Seal Replacement is $784 with $322 for parts and $462 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Lexus RX330V6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$1155.22Shop/Dealer Price$1336.94 - $1835.32
2006 Lexus RX330V6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$1125.49Shop/Dealer Price$1297.01 - $1787.74
2004 Lexus RX330V6-3.3LService typeFront Crankshaft Seal ReplacementEstimate$1125.49Shop/Dealer Price$1297.15 - $1788.00
Show example Lexus RX330 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(325)

Rating Summary
306
6
2
4
7
306
6
2
4
7

Brandon

19 years of experience
275 reviews
Brandon
19 years of experience
Lexus RX330 V6-3.3L - Radiator - Lithonia, Georgia
Brandon was great! He was punctual and communicated efficiently. Great guy and awesome mechanic.

Eladio

11 years of experience
148 reviews
Eladio
11 years of experience
Lexus RX330 V6-3.3L - ignition key inspection - Greensboro, North Carolina
Eladios was very professional and courteous. He was clear in is explanations. I highly recommend him!

Leslie

25 years of experience
100 reviews
Leslie
25 years of experience
Lexus RX330 V6-3.3L - Car is overheating - Glenside, Pennsylvania
Excellent service and honest mechanic.

Mark

42 years of experience
77 reviews
Mark
42 years of experience
Lexus RX330 V6-3.3L - Check Engine Light is on - Cumming, Georgia
Quickly diagnosed and fixed the problem. Thanks

Excellent Rating

(325)

Rating Summary
306
6
2
4
7
306
6
2
4
7
Number of Lexus RX330 services completed
3575+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Obtain a G1 ASE Study Guide and Practice Test
Automotive technician jobs pay more if you’re ASE certified. Get the study guide and practice test to be a G1 Maintenance and Light Repair Technician.
Symptoms of a Bad or Failing Clutch Master Cylinder
Common signs include low or dirty fluid, difficulty shifting, and abnormal pedal behavior.
The Traveler’s Guide to Driving in Argentina
It is safe to drive in Argentina if travelers drive defensively in their rental car. Road signs are in Spanish but have similar shapes to US signs.

My engine light came on code shoed P0037 its a Lexus is300 is it just changing the o2 sensor?

P0037 is an oxygen sensor code referring to bank 1 sensor 2. This is the right hand side of the engine and the second sensor on that side. The code may be caused by the catalyst on that side or...

Can u give me a rough estimate for replacing inner and outer tie rod ends on my tundra 2006 sr5?

Hi there. Although the creaking noise might be caused by a tie rod wearing out, it's also possible that another steering system or suspension component is faulty and causing the noise. You might want to have one of our mobile...

I have to replace the alternator on a 2007 Acura TSX - car won't start without replacing it. Car is at the dealership and they ha

If you fully charge the battery, you can start the car and drive it home assuming you live close to the dealership. That is a useful option because using YourMechanic's on-line calculator for your year, make and model, the cost...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com