Lexus LS400 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(130)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(130)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Lexus LS400 Front Crankshaft Seal Replacement is $992 with $418 for parts and $574 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1657.18Shop/Dealer Price$1902.74 - $2565.69
2000 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1465.10Shop/Dealer Price$1694.89 - $2354.66
1991 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1610.33Shop/Dealer Price$1840.04 - $2491.12
1992 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1610.33Shop/Dealer Price$1840.03 - $2491.09
1993 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1610.33Shop/Dealer Price$1853.44 - $2514.56
1998 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1435.34Shop/Dealer Price$1658.87 - $2297.21
1996 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1449.74Shop/Dealer Price$1675.98 - $2324.44
1997 Lexus LS400V8-4.0LService typeFront Crankshaft Seal ReplacementEstimate$1449.74Shop/Dealer Price$1675.86 - $2324.24
Show example Lexus LS400 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(130)

Rating Summary
121
7
1
0
1
121
7
1
0
1

Michael

0 years of experience
243 reviews
Michael
0 years of experience
LS400 1991 - Car is not starting - Las Vegas, NV
Extremely Knowledgeable in the generation of my vehicle (1991 LS400), ON-Time and prepared! He got straight to work and also explained each step without me asking what he was doing, I really appreciated that because the previous Mechanic RAYMOND that was sent by YourMechanic.com did not perform many of the tasks for the Inspection of my vehicle as I clearly saw MICHAEL MILLER Complete.

Andrew

12 years of experience
83 reviews
Andrew
12 years of experience
LS400 1991 - Brakes, Steering and Suspension Inspection - Puyallup, WA
Andrew explained issues he was seeing and did a full inspection of my vehicle.

Michael

35 years of experience
131 reviews
Michael
35 years of experience
LS400 1997 - Cruise control is not working - Los Alamitos, CA
Thanks

Peter

36 years of experience
1542 reviews
Peter
36 years of experience
LS400 1998 - Positive Crankcase Ventilation (PCV) Valve - Chandler, AZ
Peter has worked on my Lexus LS 6 times. I have one appoInment coming up and the wait to book Peter was 2 weeks. He is simply the best. Like the Mercedes commercial says: the best or nothing. Not only is Peter the best, he is also extremely nice, personable and willing to share his knowledge. A rare find indeed!

Excellent Rating

(130)

Rating Summary
121
7
1
0
1
121
7
1
0
1
Number of Lexus LS400 services completed
1430+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Condenser Fan Relay Last?
The The condenser fan relay allows the cooling fan to pull air through the radiator and the condenser to cool the vehicle. This part is connected to the condenser fan and is normally used when the air conditioner in the...
P0210 OBD-II Trouble Code: Injector Circuit Malfunction - Cylinder 10
P0210 P0210 code definition Injector Circuit Malfunction - Cylinder 10 What the P0210 code means P0210 will be seen when the Engine Control Module (ECM) has found a malfunction within the cylinder 10 fuel injector circuit. The ECM constantly looks...
How Does a Clutch Work in a Manual Transmission?
The The clutch in a car transmission is what works to engage and disengage the drive shaft’s moving parts. In a manual transmission, the driver has to manipulate a pedal or a lever in order to shift gears. The clutch...

How do you adjust the manual driver seat in a 2012 Toyota RAV4?

If your car has manual controls for the driver seat, you can adjust a lot of different things in order to get the right position for driving, as well as the comfort you want. Here’s what you need to do:...

There is a grinding noise that gets worse the faster I go.

Hello there, thank you for asking about your 2005 Kia Sorento. Most of the time if there is a grinding noise that is related to the speed of the vehicle it is caused by a bad wheel bearing. When a...

Car died while exiting the free way. Went to restart and couldn't even get it to rev. What could it be?

This may be related to many different possibilities, some of which may be related to a lack of spark or possibly timing issues and some of which may be related to a fuel delivery problem or a combination of both....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com