Lexus IS F Fuel Injector Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Lexus IS F Fuel Injector Replacement is $1720 with $1468 for parts and $252 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2009 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3215.06	Shop/Dealer Price$3965.28 - $6179.47
2014 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3941.11 - $6149.34
2013 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3941.22 - $6149.54
2010 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3941.22 - $6149.53
2008 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3947.85 - $6161.14
2011 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3941.85 - $6150.64
2012 Lexus IS FV8-5.0L	Service typeFuel Injector Replacement	Estimate$3198.84	Shop/Dealer Price$3941.29 - $6149.66

Show example Lexus IS F Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Johnny

34 years of experience

392 reviews

Johnny

34 years of experience

by Adam

Lexus IS F V8-5.0L - Pre-purchase Car Inspection - Sacramento, California

Always nice having an experienced professional to help you make your decision with a pre purchase inspection. Arrived early, made sure I knew mechanically and cosmetically about the car. A++

Nathan

22 years of experience

298 reviews

Nathan

22 years of experience

by Mike

Lexus IS F V8-5.0L - Pre-purchase Car Inspection - Austin, Texas

Excellent communication. He called me when he was done with his inspection, and asked if there was anything specific that I needed to be looked at. Took pictures of the car for me, and gave a detailed report.

Richard

12 years of experience

450 reviews

Request Richard

Richard

12 years of experience

Request Richard

by Ben

Lexus IS F V8-5.0L - Battery - Washington, District of Columbia

Richard was punctual and professional Great work

Joseph

28 years of experience

578 reviews

Joseph

28 years of experience

by Rex

Lexus IS F V8-5.0L - Pre-purchase Car Inspection - Katy, Texas

Joseph was prompt and it was easy to get in touch with him via text messaging. He found 3 problem areas in the vehicle pre-purchase inspection that I will make the dealer aware of, which will help me with the buying decision.

Excellent Rating

(8)

Rating Summary

8

0

0

0

0

8

0

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

What to Do if Your Car Has Been Stolen

Many Many people have experienced that momentary jolt of fear after exiting a business and not seeing their vehicle. The first thought that comes to mind is that your vehicle has been stolen, but then you realize you parked it...

How to Prepare for the New Mexico Driver’s Written Test

Before Before you can take your road test to get your license in New Mexico, you need to make sure you have your learner’s permit. The only way to get the permit is to pass the state’s written test. The...

Cell Phone and Texting: Distracted Driving Laws in Wisconsin

Distracted Distracted driving is defined as drivers who are occupied or engaged with an activity other than driving while operating a motor vehicle. This includes multi-tasking while driving. Texting and using a cell phone while driving are considered the two...

P0306 code misfire

Hello there, many common faults will cause a cylinder 6 misfire in your 2001 Chevrolet Impala. The most common faults are the spark plugs, plug wires, fuel injectors, vacuum leak, fuel pump, or low cylinder compression. A qualified Technician such...

How do I remove the window regulator on my front passenger side door of my Hyundai I30 2010?

Hi there. The best advice we can offer here is for you to search online for a service and repair module for your 2010 Hyundai. It has much more detailed information about completing this service than we can offer on...

What is a P04330 code?

A P0430 code indicates that there is an issue with the performance of the catalytic converter on bank 2. It is also possible that a bad downstream o2 sensor could be giving false readings. I would recommend having your exhaust...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com