Kia Spectra5 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(41)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(41)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Kia Spectra5 Power Steering Pressure Hose Replacement is $259 with $119 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Kia Spectra5L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$393.52Shop/Dealer Price$456.75 - $638.34
2006 Kia Spectra5L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$384.51Shop/Dealer Price$445.97 - $626.24
2008 Kia Spectra5L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$777.25Shop/Dealer Price$936.92 - $1411.76
2007 Kia Spectra5L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$777.25Shop/Dealer Price$936.92 - $1411.76
2009 Kia Spectra5L4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$777.25Shop/Dealer Price$938.40 - $1414.34
Show example Kia Spectra5 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Kia mechanics

Real customer reviews from Kia owners like you.

Excellent Rating

(41)

Rating Summary
39
1
0
0
1
39
1
0
0
1

Russell

25 years of experience
356 reviews
Russell
25 years of experience
Kia Spectra5 L4-2.0L - Power Window Switch Replacement (Passenger Side Front) - Oregon City, Oregon
Russell was great! Very professional, even though the dealership ordered the wrong part for my window switch, was able to get the right part and was able to fit me in to fix it! Love having 4 functional windows!

Jason

33 years of experience
617 reviews
Jason
33 years of experience
Kia Spectra5 L4-2.0L - Alternator - Tucson, Arizona
Highly recommend for any maintenance needed for your vehicle, quick, knowledgeable and friendly. Great person to have a good conversation with while maintenance is being done but he still stays focused on repairing the issues you have requested! Very happy with my services

Terrance

21 years of experience
63 reviews
Terrance
21 years of experience
Kia Spectra5 L4-2.0L - Battery - Madison, Tennessee
Terrance was great. I wish more people were as good as his is at his job.

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Kia Spectra5 L4-2.0L - Part Pickup - Arlington, Texas
Great guy.

Excellent Rating

(41)

Rating Summary
39
1
0
0
1
39
1
0
0
1
Number of Kia Spectra5 services completed
451+
services done by our mechanics
TOTAL NUMBER OF EXPERT Kia MECHANICS
1100+
experts on our platform

Recent articles & questions

What's the Point of the Air Filter in My Car?
Considered Considered a part of the fuel supply system in a vehicle, a vehicle air filter helps to keep the engine clean and free of debris. Having a mechanic change out the air filter on a regular basis helps keep...
Tire Maintenance and Safety: How To Care For Your Tires
Tires need to be maintained just like every other part of your vehicle.
P0235 OBD-II Trouble Code: Turbocharger Boost Sensor A Circuit Malfunction
P0235 P0235 code definition Turbocharger Boost Sensor A Circuit Malfunction What the P0235 code means P0235 is an OBD-II generic code that is triggered when the Engine Control Module (ECM) detects intake boost pressure sensor A input malfunction when compared...

What will set off the airbags?

The airbags are made to inflate in the case of a crash, but how severe of a crash does it take to deploy the airbags? This is a fairly common question, but doesn’t quite capture the complexity involved in the...

I'm smelling antifreeze an seeing a little steam from under the hood

The engine in your Pontiac Grand Prix is known to corrode out at the corners of the intake and head. The leak starts with a gasket and grows to damage the intake and heads. I suggest removing the intake and...

Audi Q5 gets short of coolant in the reservoir and when I turn on my air conditioning it seems to drain 2012 Audi A5 Quattro

Hi there, unless the "coolant loss" (https://www.yourmechanic.com/article/how-often-do-i-need-to-top-off-my-coolant) you continue to see is the result of an incomplete coolant bleeding procedure, there is still a coolant loss somewhere is the cooling system. Hopefully, the "temperature rise" you mention did not cause...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com