Jeep Wagoneer Ignition Cable (Spark plug wires) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Ignition Cable (Spark plug wires) Replacement Service

How much does a Ignition Cable (Spark plug wires) Replacement cost?

On average, the cost for a Jeep Wagoneer Ignition Cable (Spark plug wires) Replacement is $175 with $35 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Jeep WagoneerL6-4.0LService typeIgnition Cable (Spark plug wires) ReplacementEstimate$262.10Shop/Dealer Price$292.48 - $375.50
Show example Jeep Wagoneer Ignition Cable (Spark plug wires) Replacement prices

What is the Ignition Cable (Spark plug wires) all about?

The ignition cables, also known as “spark plug wires” are part of the ignition system. They transfer the spark from the distributor or ignition coil to spark plugs that ignite the air-fuel mixture, starting the engine.

Over time, the cables can get weak and break down. This will make it harder for the spark to reach the engine cylinders, resulting in engine misfires. The car may not start at all. If one of the spark plugs has gone bad, the car will still start and run, but it will run poorly.

Keep in mind:

  • Ignition cable failure is often caused by other failing pieces in the ignition system; a mechanic should check for any other malfunctioning parts, and replace any parts of the system that don’t work.
  • Every time the ignition cables are replaced, the spark plugs should be inspected.
  • Leaking oil or coolant can cause ignition wire failure. If this is the case, the cause of the leak should be repaired or replaced, or else the new ignition wires will quickly be damaged as well.

How it's done:

  • Scan the computer system in the car for codes.
  • Inspect ignition cables (look for white spots).
  • Ohm test on individual cables.
  • Remove and replace the cables if found faulty.
  • Inspect the spark plugs.
  • Clear the codes.

Our recommendation:

Ignition wires should be replaced at least every 60,000 miles, but whenever your car is serviced, it’s a good idea to have the entire ignition system inspected. Any time that you have spark plugs replaced, it’s a good idea to have the ignition wires replaced as well. If you notice that your engine is running poorly, you should schedule an inspection.

What common symptoms indicate you may need to replace the Ignition Cable (Spark plug wires)?

  • Check Engine light is on.
  • Engine misfires.
  • Poor gas mileage.
  • Engine may shake (light vibration).

How important is this service?

The fuel in your automobile is ignited by a spark. This starts with the ignition coil, which transforms low voltage power into extremely high voltage. This high voltage is transferred through the ignition cables, and to the spark plug, where a spark is created that ignites the engine’s fuel, and powers the engine.

When one or more ignition cables fail, this voltage will not be transferred from the ignition coil to the spark plugs, and the fuel will not be ignited. Depending on how many of your ignition cables malfunction, your car will either run poorly, or won’t run at all.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0

Jeff

34 years of experience
441 reviews
Jeff
34 years of experience
Jeep Wagoneer L6-4.0L - Starter - Davis, California
Jeff was fantastic I was sceptic all about using this service and he made it amazing did a great job in a timely manner really can't say enough good things about this experience!

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
Jeep Wagoneer L6-4.0L - Automatic Transmission Fluid Service - Houston, Texas
Ben did a fantastic job!

Christopher

16 years of experience
246 reviews
Christopher
16 years of experience
Jeep Wrangler L6-4.0L - Ignition Cable (Spark plug wires) - Matthews, North Carolina
Did a great job very quickly and didn’t mind me watching.

Richard

22 years of experience
461 reviews
Richard
22 years of experience
Jeep Grand Cherokee V8-5.7L - Ignition Cable (Spark plug wires) - Newnan, Georgia
Richard was great, he called to see if he could arrive 2 hours early, which was great. When he arrived, he jumped right on the job and knew exactly what to do. I will definitely request him for my next repair!

Excellent Rating

(9)

Rating Summary
8
1
0
0
0
8
1
0
0
0
Number of Jeep Ignition Cable (Spark plug wires) Replacement services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P0558 OBD-II Trouble Code: Brake Booster Pressure Sensor Circuit High
P0558 means there is a voltage problem with the brake booster pressure sensor, likely due to vacuum leaks or a faulty sensor.
How Long Does a Coolant Recovery Reservoir Last?
The The coolant recovery reservoir is both an expansion tank as well as a coolant recovery tank. In modern vehicles, the radiator has no cap so it has no upper tank for expansion. The coolant recovery reservoir takes this place,...
P0225 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch C Circuit Malfunction
P0225 P0225 code definition Throttle/Pedal Position Sensor/Switch C Circuit Malfunction What the P0225 code means P0225 is a generic OBD-II code which indicates that the throttle/pedal position sensor/switch C circuit has an internal failure. The sensor went out of range,...

Ford Ranger won't go into gear brand new slave cylinder installed

You may have air in the clutch hydraulic system and need to bleed out the air. When you jacked up the rear of your truck an air bubble must have gone down to the clutch slave cylinder and caused the...

Rough idle, possible misfire, bad oxygen sensor a possible cause

There are a number of things that can cause a misfire to be present, but a failing oxygen sensor is certainly one of them. As you know the oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) reads the exhaust gases and relays this information to...

Low brake pedal and anti-lock brakes are not kicking in.

The brake pedal is working to stop the vehicle, but there may be air in the controller unit causing the ABS brakes to not function. I recommend bleeding the brake system from the farthest location from the master cylinder to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com