Jeep Wagoneer Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(33)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(33)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Jeep Wagoneer Control Arm Assembly Replacement is $150 with $55 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1969 Jeep WagoneerL6-3.8LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$410.51Shop/Dealer Price$486.89 - $684.53
1973 Jeep WagoneerV8-5.9LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$407.39Shop/Dealer Price$495.51 - $737.32
1978 Jeep WagoneerV8-6.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$541.31Shop/Dealer Price$662.91 - $1005.16
1983 Jeep WagoneerV8-5.9LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$414.73Shop/Dealer Price$504.66 - $751.96
1975 Jeep WagoneerV8-5.9LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$541.31Shop/Dealer Price$662.92 - $1005.19
1985 Jeep WagoneerV6-2.8LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$305.47Shop/Dealer Price$361.24 - $494.74
1977 Jeep WagoneerV8-6.6LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$341.83Shop/Dealer Price$412.17 - $600.96
1967 Jeep WagoneerV8-5.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$341.83Shop/Dealer Price$412.54 - $601.62
Show example Jeep Wagoneer Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(33)

Rating Summary
30
2
0
0
1
30
2
0
0
1

Jeff

33 years of experience
441 reviews
Jeff
33 years of experience
Jeep Wagoneer L6-4.0L - Starter - Davis, California
Jeff was fantastic I was sceptic all about using this service and he made it amazing did a great job in a timely manner really can't say enough good things about this experience!

Ben

41 years of experience
1410 reviews
Ben
41 years of experience
Jeep Wagoneer L6-4.0L - Automatic Transmission Fluid Service - Houston, Texas
Ben did a fantastic job!

Dwaine

45 years of experience
39 reviews
Dwaine
45 years of experience
Jeep Patriot L4-2.4L - Control Arm Assembly Replacement (Front Lower Left) - Tampa, Florida
Dwaine was the biggest help for me, he showed up at my office around 12:30 to find out that my car needed a special part. He went and picked that part up for me, brought it back, and worked for almost 6 hours total so that I could be back on the road that night. The whole time he never complained, and made sure that he would get this done. I highly recommend Dwaine to help with your car!

Brandon

20 years of experience
773 reviews
Brandon
20 years of experience
Jeep Compass L4-2.4L - Control Arm Assembly Replacement (Front Lower Left, Front Lower Right) - Kissimmee, Florida
Brandon was very nice and upfront and honest with you me about what was wrong with my car. And inform me of wha had to be done. Thank you again for your hard work.

Excellent Rating

(33)

Rating Summary
30
2
0
0
1
30
2
0
0
1
Number of Jeep Control Arm Assembly Replacement services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Rear-Wheel Drive (RWD)
With With all the options available for drive wheels in vehicles, it can become confusing as to which is best for you. Here, you’ll learn five things you need to know about rear-wheel drive (RWD) so you can make a...
How to Get Rid of Unwanted Odors in Your Vehicle
When buying a used car, one of the biggest issues you’ll find is unwanted smells in the interior. Odors can be...
P2238 OBD-II Trouble Code: O2 Sensor Positive Current Control Circuit Low Bank 1 Sensor 1
What the P2238 code means? P2238 is an OBD-II generic code for the engine control module (ECM) detecting the O2 sensor for...

Loud noise from engine.

This is caused by the timing chain tensioners (https://www.yourmechanic.com/services/drive-belt-tensioner-replacement) in the engine are bad and they would need to be replaced with new chains and tensioners. On some of these vehicle the camshafts (https://www.yourmechanic.com/services/camshaft-seal-replacement) may need to also need to...

Wrong Flexpipe size repair

Shortening the flex pipe should not have an affect on performance of the engine. The length of the pipe on a daily driver is not something that is very critical to operation. In a race car it becomes more important...

My car takes a while to get to 35moh but once it reaches that it's fine what is wrong with my car

Hi Harlie. Thanks for contacting us today. In some cases, an acceleration problem accompanied by a knocking sound might be caused by low engine oil levels, loose cylinder head lifters or perhaps an engine misfire. This might also be the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com