Hyundai XG350 Car is hard to start Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(93)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(93)

Car is hard to start Inspection Service

How much does a Car is hard to start Inspection cost?

On average, the cost for a Hyundai XG350 Car is hard to start Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Hyundai XG350V6-3.5LService typeCar is hard to start InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2002 Hyundai XG350V6-3.5LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2003 Hyundai XG350V6-3.5LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Hyundai XG350V6-3.5LService typeCar is hard to start InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Hyundai XG350 Car is hard to start Inspection prices

A car that is hard to start can be a major inconvenience. While this is usually not a life threatening malfunction, it can make getting around much more difficult. There are a number of issues that will make a car hard to start. Everything from the electrical system to the fuel system to the actual starter itself can be the problem.

Finding the root cause of a hard starting engine can take some investigation. Ignoring a hard starting issue can further damage the vehicle, which will often result in a more expensive repair.

How this system works:

In order to get an engine running, it must be turned at speed so that it starts to suck fuel and air into the cylinders, and then compress and ignite this fuel/air mixture.

The starter motor is an electric motor that turns the engine to get it started. The starter motor has a small pinion gear wheel that engages with a larger gear ring at the rim of the engine flywheel.

The starter motor draws the electric current it needs to run from the battery. The starter needs a heavy current and to avoid sparking a solenoid is used. The ignition switch operates the starter motor. When the ignition is turned on, current is fed to the solenoid and into the starter motor. Once the car engine starts and the key is released, the starter motor turns off.

Common reasons for this to happen:

  • Bad Starter: Over time starter motors can wear out and start to malfunction. If this is the problem the starter will have to be replaced. If the car turns over, the problem is not the starter. If nothing happens when the key is turned the problem could be the starter, or if the car turns over very slowly and the dash lights dim while it is cranking, the starter could be the culprit.

  • Bad Relay Wiring: The wiring between the battery and starter can become loose or broken which will prevent the starter motor from functioning. The wiring will need to be replaced or repaired.

  • Low or Dead Battery: The starter motor needs voltage from the battery to operate. If the battery is low or failing it may not produce enough current for the starter motor to function. Charging or replacing the batter should resolve this problem.

It is also possible that the battery terminals have become corroded or loose. Cleaning and tightening the terminals and cables is recommended.

  • Failing Solenoid: A failing solenoid is a common issue with the starter system and if the solenoid is going bad, the car will be difficult to start. The starter will need to be inspected to determine if the problem is the starter motor itself or the solenoid. A failing solenoid will need to be replaced.

  • Failing Ignition Switch: Over time an ignition switch can start to fail and one of the most common symptoms is that the car is hard to start. If the ignition switch is hot to the touch this indicates an issue with the ignition switch wiring. A failing ignition switch will eventually stop working completely and will need to be replaced.

  • Defective Fuel Pump: If the engine is not getting enough fuel, it will be hard, if not impossible to start. The fuel pump is responsible for pulling gas from the tank to the injectors and if it is not delivering enough fuel the car will be difficult to start and eventually will not start at all.

  • Fouled Plugs: Spark plugs create the spark which allows the vehicle to burn fuel. Fouled plugs are one of the most common reasons for a hard starting engine. As electrodes wear down, the voltage required to jump the gap to ignite the fuel increases. This can lead to prolonged cranking before the engine will start.

  • Clogged Fuel Filter: A fuel filter that is clogged can make a vehicle very difficult to start. The fuel filter screens out contaminants and can become clogged over time. This will prevent the injectors from getting enough fuel, making the car hard to start.

  • Contaminated Fuel: Fuel that has too much alcohol or water in it will result in a car that is difficult and often impossible to start. Even if it does start, contaminated fuel can do serious damage to the engine. If contaminated fuel is suspected, have the vehicle inspected immediately.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the hard to start issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The starter, battery, connecting wiring and other important components will be inspected by the mechanic. This may include the vehicle's fuel pump, fuel filter, spark plugs, ignition and more. It may be necessary for the mechanic to crank up the car to verify the problem and issue an accurate diagnosis.

How important is this service?

If a car is hard to start, it's indicative of a major condition preventing normal operation and if left unattended it may lead to the car not starting at all. The vehicle should be inspected and repaired as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(93)

Rating Summary
85
5
0
0
3
85
5
0
0
3

Chet

41 years of experience
493 reviews
Chet
41 years of experience
Hyundai XG350 V6-3.5L - Cooling System Flush - National City, California
Very good guy, flushed the cooling system and fixed the problem with my wife's car heater

Derrick

20 years of experience
109 reviews
Derrick
20 years of experience
Hyundai XG350 V6-3.5L - 129,000 Miles Maintenance Service - Brooklyn, New York
Great mechanic.

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
Hyundai XG350 V6-3.5L - Check Engine Light is on - Oakland, California
Josh is great. Like seriously. He wasn't even able to fix the correct issue with my car, due to misinformation, but he still stayed until he knew I had everything for the correct repair for another day.

Harish

27 years of experience
588 reviews
Harish
27 years of experience
Hyundai XG350 V6-3.5L - Alternator - Concord, North Carolina
Did a great job in great time, definitely recommend to others.

Excellent Rating

(93)

Rating Summary
85
5
0
0
3
85
5
0
0
3
Number of Hyundai XG350 services completed
1023+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

5 Essential Things to Know About Driving in Bad Weather
Knowing how to drive in bad weather will help you stay safe. Drive slowly, brake early, and prepare for black ice to drive safely in bad weather.
P0016 OBD-II Trouble Code: Camshaft Position A - Camshaft Position Correlation (Bank 1)
P0016 code definition Camshaft Position A - Camshaft Position Correlation (Bank 1) What the P0016 code means P0016 is the OBD-II generic...
P2265 OBD-II Trouble Code: Water in Fuel Sensor Circuit Range/Performance
P2265 P2265 code definition The P2265 diagnostic trouble code is an indication that there is a range/performance issue with the water in fuel sensor circuit. Related Trouble Codes: P2264 OBD-II Trouble Code: Water in Fuel Sensor Circuit P2266 OBD-II Trouble...

What does the electric stability control (ESC) off indicator mean?

The electric stability control (ESC) off indicator is located on the instrument panel. This light is illuminated when the ESC has manually been turned off. Tip The ESC off indicator briefly illuminates when the car is first turned on. The...

The car is overheating

The normal opening temperature of the thermostat is between 85c and 102c. Your car is running in the middle and this is good. You should not be overheating as this is the normal operating range for your engine. If you...

After jumping battery windows don’t roll up or down with switches only when operating convertible

Be sure you have not activated any interlock (safety switch, often a push button on driver side typically) that will disable individual window activation. A fault such as this is usually due to an electrical failure. If none of the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com