Honda S2000 Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(43)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(43)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Honda S2000 Intake Manifold Gaskets Replacement is $513 with $93 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Honda S2000L4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$650.42Shop/Dealer Price$707.58 - $854.74
2000 Honda S2000L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.25 - $818.44
2009 Honda S2000L4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.32 - $818.57
2003 Honda S2000L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.32 - $818.56
2008 Honda S2000L4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$679.74 - $826.30
2004 Honda S2000L4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.74 - $819.30
2002 Honda S2000L4-2.0LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.37 - $818.65
2005 Honda S2000L4-2.2LService typeIntake Manifold Gaskets ReplacementEstimate$623.39Shop/Dealer Price$675.32 - $818.56
Show example Honda S2000 Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Honda mechanics

Real customer reviews from Honda owners like you.

Excellent Rating

(43)

Rating Summary
36
3
1
2
1
36
3
1
2
1

Matt

16 years of experience
130 reviews
Matt
16 years of experience
Honda S2000 L4-2.0L - Starter - Tacoma, Washington
Matt was delightfully early. Explained what he was going to do. He was thorough and took great care with my S2000. When replacing the starter didn't seem to correct the problem, he searched for the problem and pin pointed it. I got that issue fixed and voila, the car now runs smoothly. Matt pointed out a couple of minor problems that eventually I will have to fix. All in all, Matt did an excellent job and finished early!

H

27 years of experience
828 reviews
H
27 years of experience
Honda S2000 L4-2.0L - Car AC Repair - Sunnyvale, California
Honorio came early and got the job done quickly.

Chris

27 years of experience
126 reviews
Chris
27 years of experience
Honda S2000 L4-2.2L - Spark Plugs - Granite Bay, California
Chris came out to do a few things on my car, routine maintenance. He was more than on time, very professional, friendly, knowledgeable, and a great mechanic of course! I was curious about the maintenance that was about to ensue, so he very kindly let me hang around and walked me through everything he was doing, answered all of my questions, and we just had great conversations for around an hour. I'm honestly looking forward to the next time my car needs some work! Thank you YourMechanic for this great service and great staff.

Damian

19 years of experience
16 reviews
Damian
19 years of experience
Honda S2000 L4-2.2L - Battery - Bethesda, Maryland
Damian handled my dead battery with ease and brought my car back to life. Thank you!

Excellent Rating

(43)

Rating Summary
36
3
1
2
1
36
3
1
2
1
Number of Honda S2000 services completed
473+
services done by our mechanics
TOTAL NUMBER OF EXPERT Honda MECHANICS
1700+
experts on our platform

Recent articles & questions

C1104 OBD-II Trouble Code: Traction Control Active Lamp - Circuit Short to Battery
Trouble code C1104 means the Engine Control Unit (ECU) has registered a short circuit issue in the traction control lamp.
How to Remove Wheel Locks
When When you have nice, new rims (https://www.yourmechanic.com/article/how-rims-work-and-why-they-matter) on your car, you won’t be the only one admiring them. Good-looking wheels draw the attention of car aficionados and thieves alike. Wheels are an easy mark for thieves. When you leave...
The Guide to Colored Curb Zones in Montana
Montana Montana drivers are well aware of the laws and regulations that apply to them when they are out on the roads and driving. They know they need to obey the speed limits and use their signals when turning and...

Why why does the check engine light come on but runs fine until it gets to 2500 RPMs then it stutters

Hi there. It is possible that you could have a bad camshaft (https://www.yourmechanic.com/services/camshaft-position-sensor-replacement) or crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement). These sensors keep track of the timing of the engine and send signals to the vehicles PCM. If one of these sensors...

Could a problem with the knock sensor keep my car from starting?

Hi there. A problem with the knock sensor or knock sensor circuit can definitely make starting a vehicle more difficult. A knock sensor is used by engineers to help the engine's computer sense possible internal engine failure before it becomes...

Why is my car slow to accelerate when I press the gas pedal all of the way down in my 1993 Mitsubishi Eclipse

Hello. It sounds like you have a serious transmission issue. If the engine is revving and the vehicle is not moving then this is a sign that the transmission is slipping and needs to be replaced or rebuilt. If there...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com