GMC Typhoon Lubricate Driveshaft at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,948)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,948)

Lubricate Driveshaft Service

How much does a Lubricate Driveshaft cost?

On average, the cost for a GMC Typhoon Lubricate Driveshaft is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC TyphoonV6-4.3L TurboService typeLubricate DriveshaftEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1992 GMC TyphoonV6-4.3L TurboService typeLubricate DriveshaftEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example GMC Typhoon Lubricate Driveshaft prices

What is lubricating the driveshaft all about?

Along the drivetrain, whenever torque needs to travel from one place to another, a driveshaft is used. Some cars have two driveshafts under them, usually for four-wheel-drive applications. U-Joints are couplings that hold sections of driveshaft together and can withstand large amounts of torque. The U-joint and the slip both need lubrication to work smoothly. This means lubricant needs to be applied to every point where the driveshaft meets another section of shaft or any other part of the vehicle.

Keep in mind:

  • While lubricating will help with scraping noise and minor vibration, it will not repair actually broken parts.
  • Inspect the parts of the the driveshaft to make sure they do not need full replacement.
  • Even small spots of excess wear are bad on parts that withstand so much torque, no problem is too small to be addressed on the driveshaft.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The slip joints and U-joints on all drive shafts are located
  • The Zerk grease fittings on the slip joint and U-joints are located
  • New grease is pumped into the grease fittings with a grease gun
  • The vehicle is lowered off of the jack stands

Our recommendation:

Check the manual of your vehicle to see if the manufacturer has specific instructions on servicing and lubricating the driveshaft. If the manufacturer suggests it is time for a service or if the vehicle has symptoms of a malfunctioning driveshaft, then it should be done immediately. These parts are under a lot of force and will usually fail when the car is in motion. While under the vehicle, inspect all of the connections along the drivetrain and keep an eye out for any parts that seems excessively worn. Bring a rag and wipe any mud or dust off to check for damage.

What are the common symptoms indicating you need to lubricate the driveshaft?

  • Clicking or grating sounds while the vehicle is in gear
  • Vibration in the vehicle while it is running

How important is this service?

This service is very important. Poor lubrication is one of the top reasons why driveshafts fail. When they do fail, driveshafts will fail while in motion and can take out more expensive parts around them. These preventative maintenance steps are extremely important in order to avoid more costs down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50

James

31 years of experience
694 reviews
James
31 years of experience
GMC Typhoon V6-4.3L Turbo - Alternator - Newport Beach, California
good

Leslie

14 years of experience
81 reviews
Leslie
14 years of experience
GMC Yukon XL 1500 V8-5.3L - Alternator - Essington, Pennsylvania
Leslie did a great job.

Larry

8 years of experience
37 reviews
Larry
8 years of experience
GMC K1500 V8-5.7L - Brake Pads Replacement (Front) - San Antonio, Texas
He was early and that was great with my schedule. He did a great job.

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
GMC Sierra 1500 V8-4.8L - Car is not starting - Houston, Texas
The best mechanic i ever had

Excellent Rating

(2,948)

Rating Summary
2,788
79
21
10
50
2,788
79
21
10
50
Number of GMC services completed
32428+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mini Cooper Hardtop
Key Key Features The standard 1.6 liter in-line four cylinder engine offers 121 horsepower at 6,000 rpm. While driving in the city, expect to get around 29 mpg while the driving on the highway will get you around 37 mpg....
Symptoms of a Bad or Failing CV Boot
Common signs include grease leaking onto the inside of the wheels, vibrations around the CV axle, and clicking noises during turns.
How to Replace a Fuel Injector
Fuel injectors are faulty if the smell of fuel is present in the vehicle, you have engine performance issues, or the check engine light comes on.

how to set timming for a freelander TD4 DIESEL 1998 MODEL 2.2 CAN YOU PLEASE HELP ME I HAVE BEEN TRYING TO FIX BUT I CANNOT

Hi there, thanks for writing in. Setting timing on any engine can be very tricky to do, and it's even harder to explain how to do it over a computer without being able to see the engine in person. Unfortunately...

condor brake shoes

As you may know, the hand brake (emergency brake) is also a drum brake which requires the use of brake shoes instead of brake pads on most modern vehicles. The seals being damaged suggests that there may be some issues...

Changed starter on 95 Ford Thunderbird. When connecting neg cable to battery, starter engages.

It is possible that the signal wire for the starter was hooked up on the same ring as the positive lead from the battery. This would cause the issue you are experiencing. I would recheck your starter connections to ensure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com