GMC Typhoon Loud noise is coming from rear brakes Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,976)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,976)

Loud noise is coming from rear brakes Inspection Service

How much does a Loud noise is coming from rear brakes Inspection cost?

On average, the cost for a GMC Typhoon Loud noise is coming from rear brakes Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 GMC TyphoonV6-4.3L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1992 GMC TyphoonV6-4.3L TurboService typeLoud noise is coming from rear brakes InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example GMC Typhoon Loud noise is coming from rear brakes Inspection prices

Depending on the make and model you drive, you might have disc brakes on the front and drum brakes on the rear, or you could have four-wheel disc brakes. These are becoming more and more common today. However, regardless of the configuration, you should not have a loud noise coming from the rear brakes. This indicates that something has gone wrong, and there are several potential culprits.

How this system works:

Your rear brakes work similar to the front brakes. The master cylinder sends pressurized fluid through the brake lines. If you have rear drum brakes, the fluid causes the actuator to push the brake shoes outward, where they press against the inside of the drum. In the case of rear disc brakes, the fluid activates the caliper, which then squeezes the caliper between two brake pads.

This is identical to how your front brakes operate, but the pads are generally smaller than those used on the front. This is because most of the stopping power in your car is generated in the front.

However, your rear brakes are just as important as the front, and if you’re noticing a loud noise from the rear during braking, it could be a number of different things, depending on the type of noise and when it occurs.

Common reasons for this to happen:

  • Worn Brake Pads: Obviously, the most common potential problem here is worn out rear pads (or shoes if you have drum brakes). If you notice a loud grinding sound, it could be the metal backing plate from the pads making contact with the rotor.

  • Broken or Missing Caliper Bolt: Your calipers are essentially two halves held together with bolts (not the slide pins). If one of the bolts is missing or broken, it’s possible that part of the caliper has popped out and is making contact with your wheel.

  • Contact with the Squealer: Squealers are metal tabs designed to lightly contact the rotor and create a noise that warns you the pads are wearing down. If your pads are nearing the end of their life, it’s possible this is the noise you’re hearing.

  • Parking Brake Shoes Stuck: Your parking brake is located in the rear of the car. In a disc brake setup, there are shoes located inside the inner drum built into the rotor. If the shoes are stuck, it’s possible that the sound you’re hearing is them contacting metal while you’re driving.

  • Wheel Bearing Failure: If the noise you’re hearing is a “howl” and it’s constant, the first thing to suspect would be one of the wheel bearings (whichever side is the loudest while you’re driving).

  • Pads Settling into Place: If the sound you’re hearing is more of a “pop” or a loud click, it might be nothing more than your brake pads being slightly worn and settling into place when you push the brake pedal.

  • Normal Pad Vibration: If you only hear the noise when you’re backing up, it’s possible that it is just a normal vibration caused by the friction material of the pad lightly contacting the rotor’s surface. This is called “resonant frequency”, and can occur with both disc and drum brakes.

What to expect:

A top-rated mobile mechanic will come to your home or office and will inspect your rear brakes. This inspection will include the drums and shoes or the rotors and calipers. It should also include the brake lines and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your rear brake pads, the rotors, calipers, and the brake lines. It may be necessary to remove one or both rear wheels for a visual inspection. It may also be necessary to test drive the vehicle if the source of the problem is not immediately apparent in order for the mechanic to verify any and all noises.

How important is this service?

The mechanic will visually inspect the rear brakes, as well as other components that might be causing the noise you’re experiencing. It might be necessary for the mechanic to test drive the vehicle in order to duplicate the noise and better diagnose the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(2,976)

Rating Summary
2,816
79
21
10
50
2,816
79
21
10
50

James

31 years of experience
705 reviews
James
31 years of experience
GMC Typhoon V6-4.3L Turbo - Alternator - Newport Beach, California
good

Franky

29 years of experience
43 reviews
Franky
29 years of experience
GMC Yukon XL 1500 V8-5.3L - Loud noise is coming from rear brakes - Morton Grove, Illinois
Excellent experience with Franky! On time. Honest. Came to do brake job. In the process he informed me that my pads were in good shape and did not need to be replaced. Just cleaned and greased. Saved me $$!

Tavaris

14 years of experience
93 reviews
Tavaris
14 years of experience
GMC Envoy L6-4.2L - Alternator - Snellville, Georgia
He was on time.... and he was fast..... car is running good now and I'm thankful for his work......work very well done ! Another service is scheduled for Saturday :)

Jeffrey

18 years of experience
89 reviews
Jeffrey
18 years of experience
GMC Savana 2500 V8-6.0L - Electrical components are not working - Powder Springs, Georgia
Jeffrey was able to troubleshoot our electrical problem and find the problem. He completed the repair quickly and everything was working as expected once he was done. Would definitely have Jeffrey work on my vehicles again if the need arises.

Excellent Rating

(2,976)

Rating Summary
2,816
79
21
10
50
2,816
79
21
10
50
Number of GMC services completed
32736+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
How to Replace an Intake Air Temperature Sensor
An air temperature sensor, or air charge temperature sensor, signals a car’s computer about the air-to-fuel ratio. Replacing one requires few tools.
What Does the Trailer Tow Hitch Warning Light Mean?
The trailer tow hitch light is designed to warn you when there is an issue with your car's tow hitch, possibly that it is unlocked.

98 camry starter clicking and the battery and starter is good.

Hi there. Check the battery cables (https://www.yourmechanic.com/services/service-battery-cables) and make sure that they are tight and clean. Check the battery for a load test. The battery should not drop more than 11.5 volts during a voltage drop test. If the battery...

I want to know what wire is the high beam wire.

Hi there. The best thing to do is get a digital volt meter or test light and check the headlight high beam harness for power and that will tell you which wire is the power wire for the high beam...

truck is having starting issues

If the symptom is tied to how you manipulate the key, there might be a problem with the ignition switch. To get this resolved, if you want the required diagnostic steps performed by a certified Mechanic, dispatched by YourMechanic (https://www.yourmechanic.com)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com