GMC Sierra 3500 Classic Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a GMC Sierra 3500 Classic Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 GMC Sierra 3500 ClassicV8-8.1LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 GMC Sierra 3500 ClassicV8-6.6L Turbo DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2007 GMC Sierra 3500 ClassicV8-6.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example GMC Sierra 3500 Classic Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Gabriel

13 years of experience
39 reviews
Gabriel
13 years of experience
GMC Sierra 3500 Classic V8-6.6L Turbo Diesel - Center Support Bearing - Colorado Springs, Colorado
Great service! Made sure the job was done and done right!

Joshua

27 years of experience
709 reviews
Joshua
27 years of experience
GMC Sonoma L4-2.2L - Car is not getting enough power - Oakland, California

Ricardo

14 years of experience
339 reviews
Ricardo
14 years of experience
GMC Sierra 1500 V8-4.8L - Car is not getting enough power - Bell, California
Did an excellent job on cleaning the throttle and setting the calibrations to where it should read, I appreciate that he check or Inspected the rest if my truck and explain them to me and get them check out in the future . I would use Richardo again . He got an A+ in my book !!! Thank you, Luis Beza

Brandon

18 years of experience
275 reviews
Brandon
18 years of experience
GMC Acadia V6-3.6L - Car is not getting enough power - Snellville, Georgia
Great!

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Car is not getting enough power Inspection services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Cadillac CTS
The The 2012 Cadillac CTS comes with high tech features and a large amount of standard equipment when compared to its Japanese and European counterparts. The CTS is available in wagon, coupe, and sedan models to fit the needs of...
Symptoms of a Bad or Failing Air Cleaner Temperature Sensor
If your car is having trouble starting in the cold, the Check Engine Light comes on, or idle quality is poor, you may need to replace the ACT sensor.
Top Automotive News & Stories: July 27-August 3
Each week we compile the best announcements and developments from the world of cars. Here are the topics you can’t miss from July 27 to August 3. Most Stolen Cars List Released most stolen cars...

Truck has trouble starting, looks like it's not getting enough gas.

If you have to feather the gas pedal to keep the motor running, this suggests that the fuel pressure may not be maintained at the correct level when starting. The fuel pressure regulator (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) is a unit that monitors and...

Drove thru a puddle now car turns over but won't start I've tested started altinator battery fuses distributor cap and spark plugs

You will need to check to see if the engine has spark or fuel pressure. You may have tripped the fuel inertia switch and just need to reset it. You should have a mechanic like one from YourMechanic come and...

I just got new tires for my 1995 GMC Sonoma. They rub slightly on the frame when the wheel is locked in a turn. I am going to get spacers, but want to make sure that I get the correct size. The specs on the spacers are: Wheel Bolt Pattern: 5x4.75 Hub Bore: 70.5mm Thread Pitch: 12x1.5 Will these fit as needed?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com