GMC Sierra 1500 HD Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Control Arm Assembly Replacement is $301 with $161 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$699.52Shop/Dealer Price$839.25 - $1250.34
2005 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1016.41Shop/Dealer Price$1235.85 - $1890.04
2001 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1016.41Shop/Dealer Price$1235.87 - $1890.08
2001 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$657.24Shop/Dealer Price$741.87 - $986.17
2006 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$690.51Shop/Dealer Price$829.97 - $1240.86
2005 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$657.24Shop/Dealer Price$742.20 - $986.74
2005 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1016.41Shop/Dealer Price$1235.89 - $1890.11
2002 GMC Sierra 1500 HDV8-6.0LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$1016.41Shop/Dealer Price$1235.87 - $1890.08
Show example GMC Sierra 1500 HD Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car Starter Repair - Indianapolis, Indiana
Great job on my truck

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - AC Belt - Indianapolis, Indiana
Great mechanic really knows his stuff. Deserves his pay.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car AC Repair - Indianapolis, Indiana
Great Mechanic Knows his stuff Worth the cost

Scott

37 years of experience
995 reviews
Scott
37 years of experience
GMC Sierra 1500 HD V8-6.0L - Fan Clutch - Gilbert, Arizona
On time , fast clean work and great service.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Sierra 1500 HD services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Pitman Arm
If your steering wheel feels loose, you loose the ability to steer, or the car starts wandering on the road, you may need to replace the pitman arm.
How to Check the CV Boots on Your Car
The constant velocity boots cover each axle joint and keeps them lubricated. Signs of a bad CV boot include a clicking noise and grease leakage.
How to Find Odors in a Car
Different problems can cause bad odors in a car. Inspect the inside and outside of the car, then take the necessary cleaning or repair procedures.

after 20 mins of driving my car acts likes its suffercating until it cools down

A faulty air/fuel oxygen sensor (https://www.yourmechanic.com/services/oxygen-sensor-replacement) may cause the engine to run rough as it send improper information to the vehicles computer. I'm curious if the Check Engine Light is on. If there is a faulty sensor the vehicle can...

Grinding noise front passenger tire, 2010 Nissan Versa

Hello. Grinding noises from a wheel are usually the result of worn brakes or wheel bearings. If the noise began after hitting a pot hole, then it may be possible that the wheel bearing was damaged form the impact. The...

Replacement alternator 136 amp vs 160 amp.

Hi there. The alternators should working just fine. I recommend that putting the brand of alternator that is on the truck in the 160 amp size. There are different models of alternators for the Dodge Ram 1500 trucks. Some have...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com