GMC Sierra 1500 HD Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(5)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a GMC Sierra 1500 HD Throttle Body Replacement is $512 with $316 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 GMC Sierra 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1056.62Shop/Dealer Price$1271.57 - $1905.06
2002 GMC Sierra 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$835.87Shop/Dealer Price$996.30 - $1471.84
2001 GMC Sierra 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$946.39Shop/Dealer Price$1134.49 - $1692.94
2005 GMC Sierra 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1256.51 - $1888.18
2003 GMC Sierra 1500 HDV8-6.0LService typeThrottle Body ReplacementEstimate$1044.01Shop/Dealer Price$1258.57 - $1891.79
Show example GMC Sierra 1500 HD Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Lavell

29 years of experience
405 reviews
Lavell
29 years of experience
GMC Sierra 1500 HD V8-6.0L - Check Engine Light is on Inspection - Orinda, California
Lavell was great, very knowledgeable and contextualized his findings so I could understand not just what he found, but also the corresponding implications.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car Starter Repair - Indianapolis, Indiana
Great job on my truck

Scott

37 years of experience
995 reviews
Scott
37 years of experience
GMC Sierra 1500 HD V8-6.0L - Fan Clutch - Gilbert, Arizona
On time , fast clean work and great service.

Bryant

13 years of experience
638 reviews
Bryant
13 years of experience
GMC Sierra 1500 HD V8-6.0L - Car AC Repair - Indianapolis, Indiana
Great Mechanic Knows his stuff Worth the cost

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Sierra 1500 HD services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0888 OBD-II Trouble Code: Transmission Relay Sense Circuit (or Relay Output Always Off)
P0888 means a problem with the transmission control relay which may result in failure to switch gears and vehicle operating in "limp" mode.
P2635 OBD-II Trouble Code: Fuel Pump ‘A’ Low Flow / Performance
P2635 P2635 Code Definition A P2635 code is a generic powertrain code related to computer output circuit issues. It means that the fuel pump 'A’ is registering a low flow, or one not within the preset parameters. Codes related to...
How Long Does a Heater Bypass Tube Last?
In In order for the cooling system on your vehicle to work, you will have to make sure that all of its components are repair free. The thermostat that is on your vehicle helps to regulate the flow of coolant...

O2 sensor failed

Hi there. A p0420 usually means the catalytic convert is not performing as well as it needs to. Over time, the catalytic converters fill up with carbon and and will not filter out the exhaust gas as efficiently as they...

I have a 2010 Hyundai Elantra. How often do you recommend the changing of the timimg belt?

The tensioner and the timing belt should be replaced every 60,000 miles. This is an "interference" engine application which means that if the timing belt were to break when the engine is operating, the valves could interfere with the pistons...

After putting gas my engine is having a weird tapping / knock like sound ?

There is a possibility that the gas is contaminated although of course the issue (the noise and the underlying mechanical cause) could have just coincidentally arose right at the time you bought gas. You might check with the station and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com