Ford Five Hundred Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(147)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(147)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Ford Five Hundred Brake Master Cylinder Replacement is $546 with $210 for parts and $336 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2005 Ford Five HundredV6-3.0LService typeBrake Master Cylinder ReplacementEstimate$791.20Shop/Dealer Price$904.64 - $1225.52
2007 Ford Five HundredV6-3.0LService typeBrake Master Cylinder ReplacementEstimate$769.58Shop/Dealer Price$878.78 - $1196.48
2006 Ford Five HundredV6-3.0LService typeBrake Master Cylinder ReplacementEstimate$769.58Shop/Dealer Price$878.84 - $1196.58
Show example Ford Five Hundred Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(147)

Rating Summary
137
5
1
1
3
137
5
1
1
3

Bryant

8 years of experience
568 reviews
Bryant
8 years of experience
Five Hundred 2006 - Starter - Indianapolis, IN
Great!

Aurelio

35 years of experience
42 reviews
Aurelio
35 years of experience
Five Hundred 2005 - Exhaust Gas Recirculation/EGR Valve - Cibolo, TX
Great job replacing my ERG valve! Could not have done it on my own. Had all the right tools and patience to turn those rusted bolts.

Mike

10 years of experience
177 reviews
Mike
10 years of experience
Five Hundred 2006 - Control Arm Assembly - Raleigh, NC
Mike is very friendly and knowledgeable. You can tell he cares about his clients and making them aware of the service he is providing. I will definitely be a returning customer.

Jermaine

22 years of experience
147 reviews
Jermaine
22 years of experience
Five Hundred 2005 - Car starts and then dies - Hyattsville, MD

Excellent Rating

(147)

Rating Summary
137
5
1
1
3
137
5
1
1
3
Number of Ford Five Hundred services completed
1617+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1800+
experts on our platform

Recent articles & questions

How to Find Deals on Car Rentals
Car rental companies ideally want you to pay the top price for every car you rent (https://www.yourmechanic.com/article/4-essential-things-to-know-before-renting-a-car). But, in a market so saturated, price competition is at an all-time high. With the amount of options available for car rentals, there...
Top 10 Scenic Drives in New Mexico
It is difficult to characterize New Mexico with its array of cultural influences and diverse terrains. From sweeping desert lands to verdant forests to regions that look more like the surface of a distant planet than a part of Earth,...
Can I Make My Own Windshield Washer Fluid?
Washer Washer fluid is typically tinted to indicate that it is not safe to consume and, though most commonly blue, it comes in a variety of colors. Warning labels caution that washer fluid contains harmful and poisonous chemicals, including methanol....

How Does Engine Timing Work?

Engine timing (https://www.yourmechanic.com/article/how-engine-timing-works) is actually a closely coordinated dance between valve timing, injector timing, and spark timing. Valve timing is the control of opening and closing the intake and exhaust valves in synchronization with the up / down movement of...

2003 Saturn L200 smells like gas

These are the effects of many concerns that may have little to do with one another. The air conditioning system has a condensation drain which may be clogged on your vehicle causing the water to flood into the interior. The...

How much does it cost to tint the windows of my Honda Accord?

Hi Art, thanks for your question. The rules and regulations for window tinting in California (https://www.yourmechanic.com/article/the-guide-to-legal-car-modifications-in-california-by-valerie-mellema) indicate that front side windows must allow over 70% of the light through but rear and back side windows can have any tint darkness....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com