Ford EXP Valve Cover Gasket Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(253)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(253)

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Ford EXP Valve Cover Gasket Replacement is $132 with $37 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Ford EXPL4-1.9LService typeValve Cover Gasket ReplacementEstimate$211.33Shop/Dealer Price$245.42 - $325.17
1985 Ford EXPL4-1.6LService typeValve Cover Gasket ReplacementEstimate$191.33Shop/Dealer Price$225.43 - $305.20
1987 Ford EXPL4-1.9LService typeValve Cover Gasket ReplacementEstimate$168.01Shop/Dealer Price$196.28 - $258.56
1983 Ford EXPL4-1.6LService typeValve Cover Gasket ReplacementEstimate$191.33Shop/Dealer Price$225.41 - $305.16
1982 Ford EXPL4-1.6LService typeValve Cover Gasket ReplacementEstimate$191.33Shop/Dealer Price$225.45 - $305.23
1988 Ford EXPL4-1.9LService typeValve Cover Gasket ReplacementEstimate$168.01Shop/Dealer Price$196.28 - $258.56
1984 Ford EXPL4-1.6LService typeValve Cover Gasket ReplacementEstimate$196.33Shop/Dealer Price$230.30 - $309.96
Show example Ford EXP Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

  • Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
  • Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
  • Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

  • Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
  • Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
  • Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
  • Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
  • Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

  • The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
  • Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
  • Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
  • Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ford mechanics

Real customer reviews from Ford owners like you.

Excellent Rating

(253)

Rating Summary
243
4
0
2
4
243
4
0
2
4

Jermaine

24 years of experience
244 reviews
Jermaine
24 years of experience
Ford Focus L4-2.0L - Valve Cover Gasket - Hyattsville, Maryland
He was very pleasant and informative. He was professional.

John

19 years of experience
86 reviews
John
19 years of experience
Ford Escape L4-2.5L - Valve Cover Gasket - Memphis, Tennessee
John was prompt, professional, friendly and very fast with finishing the job.

Rusty

23 years of experience
512 reviews
Rusty
23 years of experience
Ford Escape L4-2.3L - Valve Cover Gasket - Mansfield, Texas
Rusty was great :)

Ricardo

23 years of experience
199 reviews
Ricardo
23 years of experience
Ford Focus L4-2.0L - Valve Cover Gasket - Miami, Florida
Ricky is a great mechanic, he serviced my car properly and in a timely manner. I will definitely be using Ricky and YourMechanic again. Thank you.

Excellent Rating

(253)

Rating Summary
243
4
0
2
4
243
4
0
2
4
Number of Ford Valve Cover Gasket Replacement services completed
2783+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ford MECHANICS
1700+
experts on our platform

Recent articles & questions

Is a Keyless Push-Button Ignition More Reliable?
Vehicle Vehicle starting systems have evolved significantly since their inception. When automobiles were initially introduced, you had to manually crank the engine over with a handle on the front of your engine compartment. The next phase involved a lock and...
How Long Does an Automatic Timing Advance Unit Last?
The The automatic timing advance unit is a component in vehicles with diesel engines. Of course gas and diesel engines both work on the internal combustion principle, but they are quite different, and require different means of controlling the flow...
How to Tighten Lug Nuts
Lug nuts, or wheel locks, hold the wheel onto the car. Missing lug nuts can cause the car to wobble so it's important to keep lug nuts tight.

What should I do to protect the three way catalytic converter?

Your car’s catalytic converter (or converters, as the case may be) is a critical component of your exhaust and emissions systems. It’s responsible for burning off harmful gases that lead to environmental damage and smog production. If your converter is...

Car squealing in idle

Hi, this is a fairly common issue on all cars as the belts age over time and lose their grip which causes the squealing noise. Other owners have also reported that dirt and dust can get into the grooves in...

Downsizing tires.

What is important to note when comparing tire sizes is what each of the numbers stands for. The first number denotes the width of the tire. The second number is what is known as the aspect ratio, which denotes the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com